Dynabrade 64500 Manual

Bandsaw Blade Grinder
Model:
64500 (120v) 1 Phase 60 Hz
FIND THE MOST CURRENT OFFERING OF SUPPORT DOCUMENTS AND ACCESSORIES @ WWW.DYNABRADE.COM
Read and understand this tool manual before operating your tool. Follow all safety rules for the protection of operating personnel as well
as adjacent areas. For safety information, refer to Code of Federal Regulation – CFR 29 Part 1910, European Committee for Standards (EN)
Hand Held Electric Motor Operated Tools – Safety Requirements and applicable State and Local Regulations.
Read and understand tool manual before
work starts to reduce risk of injury to
operator, visitors, and tool.
Eye protection must be worn at all times,
eye protection to conform to ANSI Z87.1.
Respiratory protection to be used when exposed to
contaminants that exceed the applicable threshold
limit values required by law.
Carefully Read and save all instructions before operating or servicing any Dynabrade
Products offered by Dynabrade are not to be modified, converted or otherwise alerted from the original design without expressed
written consent from Dynabrade, Inc.
Warning: When using electric tools, basic safety precautions should always be followed to reduce the risk of a fire, electric shock, and personal injury,
including the following:
1. Mount tool securely. Always fasten tool to bench or other support structure to prevent tipping.
2. Keep work area clean. Cluttered areas and benches invite accidents.
3. Consider work area environment. Do not expose tools to rain. Keep work area well lit. Do not use power tools in damp or wet locations. Do not
use tools in the presence of flammable liquids or gases.
4. Guard against electric shock. Be certain machine is adequately grounded before operating.
5. Keep children away. Do not let visitors contact tool. All visitors should be kept away from work area.
6. Do not force tool. It will do a better and safer job at its intended rate.
7. Use the right tool. Do not force a small tool or attachment to do the job of a heavy duty tool. Do not use tool for purposes not intended.
8. Dress properly. Do not wear loose fitting clothing or jewelry. Clothes can be caught in moving parts. Wear protective hair covering to
contain long hair.
9. Use safety glasses. Also use face-shield or dust mask if operation area is dusty.
Tool Manual – Safety, Operation and Maintenance
SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL
WARNING
SAFETY LEGEND
WARNING
WARNING
WARNING

GENERAL SAFETY INSTRUCTIONS

Parts Page Reorder No. PD07•20
WARNING
Practice safety requirements. Work alert,
have proper attire, and do not operate tools under
the influence of alcohol or drugs.
WARNING
Ear protection to be worn when exposure to sound,
exceeds the limits of applicable Federal, State or
local statues, ordinances and/or regulations.
WARNING
Electric shock hazard. Avoid bodily contact with
grounded objects, bodies of water.
Do not damage cord set.
® Abrasive Power Tool.
Effective May, 2007