Advertisement
Quick Links
Advertisement
Related Manuals for Kogan KAWLMCRVLA
Summary of Contents for Kogan KAWLMCRVLA
- Page 1 KOGAN LOCKABLE FULL MOTION CARAVAN TV MOUNT (SUITABLE FOR 13” – 32” TVS) KAWLMCRVLA...
-
Page 3: Safety And Warnings
SAFETY & WARNINGS Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, contact your local distributor for assistance. CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury. - Page 4 COMPONENTS A Mount B Wall plate (x1) (x1) C Screw covers D Spirit level E Allen Key (x2) (x1) (x1) M-A (x4) M-B (x4) M-C (x4) M4x14 M5x14 W-A (x2) W-B (x2) Tools required for installation (not supplied) Phillips head Stud finder Pencil Drill...
- Page 5 INSTALLING MOUNT TO WALL Step 1 Unscrew the adjustment knobs on the mount (A).
- Page 6 Step 2 Drywall / plaster: Using a pencil and spirit level, mark the desired position for the mount on your wall, using the wall mount to serve as a stencil for the hole positions. Use a stud finder first to check positions of wall studs and ensure the position is free from electrical wiring. Using a drill, create the pilot holes.
- Page 7 Masonry / concrete: Using a pencil and spirit level, mark the desired position for the mount on your wall, using the wall mount to serve as a stencil for the hole positions. Using a drill, create the pilot holes. Use a ø10mm or 3/8”...
- Page 8 INSTALLING BRACKET TO TV Prepare the bracket (B) by unscrewing the adjustment knob and positioning as shown below. Align the bracket with your TV’s VESA holes and secure using supplied screws (M-A or M-B, depending on required length) and washers (M-C).
- Page 9 Loosen the mount arm via the adjustment knob and position as shown below. Lift and place the TV with bracket installed onto the wall mount arm and secure with adjustment knobs (1). Two people should carry the TV to prevent damage. Once in place, use the cable clips for cable management (2), then when all cables are in place and mount position is ready to be “locked in”, use the Allen key (E) to tighten adjustment knobs (3).
- Page 10 See above for angle limits...
- Page 11 NOTES...
- Page 12 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...