Advertisement
Quick Links
Advertisement
Related Manuals for Kogan KATVSAM85LM
Summary of Contents for Kogan KATVSAM85LM
- Page 1 MICRO-GAP FIXED TV WALL MOUNT FOR SAMSUNG TV (SUITABLE FOR 43-85" TVS) KATVSAM85LM...
-
Page 3: Safety And Warnings
SAFETY & WARNINGS Read the entire user guide before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, contact your local distributor for assistance. This product is compatible with: Samsung Neo QLED 43-85” 2021 TVs (excluding AU7000 &... - Page 4 COMPONENTS A Wall bracket (x1) B Wall bracket (x1) C TV bracket (x1) D TV bracket (x1) G M8x55 Screw H M8x18 Screw E Kickstand (x1) F (x2) (x2) (x3) I M8x10 Screw (x2) J (x4) K (x2) L Stickers (x2) W-A ST5.5x55 W-B Wall M (x1)
- Page 5 Tools Required (not supplied) Measuring tape Pencil Stud finder Drill Spirit level Phillips head screwdriver...
- Page 6 ASSEMBLY Step 1: Measure the distance of VESA holes and the width of TV to determine the centre point of the TV (d). Distance of VESA holes Witch of TV ½ of a Centre of TV a > 1000mm a < 800mm...
- Page 7 Step 2: Using a pencil and spirit level, mark the desired position for the mount on your wall, using the wall brackets as templates for the hole positions. Note: When using spirit level, ensure the bubble is centred. Note: When attaching the wall plate, the four holes near the centre of the are suggested TV to drilled on the stud.
- Page 8 Step 3: Use a stud finder first to check positions of wall studs and ensure the position is free from electrical wiring. Using a drill, create the pilot holes. Drywall / plaster/ masonry/ concrete: Use a ø8mm or 5/16” drill bit, drilling 60mm deep Studs: Use a ø4mm or 5/32”...
- Page 9 Step 4: Drywall / plaster: Attach the wall brackets (A & B) to the wall using the x8 ST5.5 screws (W- A). Note: Use wall anchors (W-B) will need to be used for holes without studs. Concrete / masonry: Attach the TV brackets (A & B) to the wall using the x8 ST5.5 screws (W-A) and wall anchors (W-B).
- Page 10 Step 5: For AU8000~AU9000 / Q60A~Q70A / QN85A~QN95A / QN800A / QN900A / Q800A / Q900A • Adhere part (F) to the rear of the TV. Ensure the arrows are pointing to the centre of the • Attach the TV brackets (C & D) to the rear of the TV using (K) and the screws (G, H or I). 7.5mm G/H/I...
- Page 11 Step 6a: Attach the kickstand (E) to the rear of the TV, in the position shown using the M8x18 screw (H), if a corresponding hole exists on the rear of the TV. Attach the spacers (J) to the rear of the TV. 15mm...
- Page 12 Step 6b: For TVs with One Connect Box • Attach the x3 spacers (O) to the rear of the TV, in the position shown, using the screws (P). • Attach the x2 spacers (O) to the rear of the TV, in the position shown, using the stickers (L).
- Page 13 Step 7:...
- Page 14 Step 8:...
- Page 15 NOTES...
- Page 16 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...