Advertisement
Installation and Basic Configuration Guide for the ProCurve 9408sl Routing Switch
This is a printed guide that describes the ProCurve 9408sl and provides procedures for installing modules and AC
power supplies into the ProCurve 9408sl, cabling the 10 Gigabit Ethernet interface ports, and performing a basic
configuration of the software. The guide explains how to perform tasks using the CLI.
Topics Specific to the 9408sl Routing Switch
•
Product overview and architecture
•
Product mounting instructions
•
Module installation
•
Basic access and connectivity configuration (passwords, IP addresses)
•
Management Module redundancy and file systems
•
Interacting with the cooling system, switch fabric module, and interface modules
•
Basic software feature configuration (SNMP, clock, mirror/monitor ports)
•
Hardware maintenance instructions
•
Software update instructions
•
Hardware specs
•
Safety and regulatory statements
•
Software specs (e.g. RFC support, IEEE compliance)
Advanced Configuration and Management Guide for the ProCurve 9300/9400 Series
Routing Switches
This is an electronic (PDF) guide that contains advanced configuration information for routing protocols and Quality
of Service (QoS). In addition, appendixes in this guide contain reference information for network monitoring, policies,
and filters. This guide is included on the Documentation CD shipped with your HP product. The latest version is also
on the ProCurve website.
Information on Configuring Features
•
Quality of Service (QoS)
•
Access Control Lists (ACLs)
•
Rate limiting
•
IPv4 routing
•
RIP
•
IP Multicast
•
OSPF
•
BGP4
•
Mulitcast BGP (MBGP)
•
Network Address Translation (NAT)
•
VRRP and VRRPE (enhanced VRRP)
•
IPX routing
•
AppleTalk routing
•
Rout health injection
•
Standby Routing Protocol (SRP)
•
RMON, Netflow, and Sflow monitoring
IPv6 Configuration Guide for the ProCurve Routing Switches
This is an electronic (PDF) guide that describes the IPv6 software and features. It provides conceptual information
about IPv6 addressing and explains how to configure basic IPv6 connectivity and the IPv6 routing protocols. The
software procedures explain how to perform tasks using the CLI. This reference is included on the Documentation
CD shipped with your HP product and is also available on the ProCurve website.
12
Advertisement
