Table of Contents
Advertisement
20
www.electrolux.com
Problem
1) After maximum 6 hours, the programme ends automatically.
2) It can happen that some area remains humid when drying big items (e.g. bed sheets ).
12.1 If the drying results are not
satisfactory
• The set programme was incorrect.
• The filter is clogged.
• The Heat Exchanger is clogged.
• There was too much laundry in the
appliance.
• The drum is dirty.
13. TECHNICAL DATA
Stated values are obtained in laboratory conditions with relevant stand‐
ards. Different parameters can change the data, for example: the quanti‐
ty of laundry, the type of laundry and the ambient conditions. The initial
moisture content of the laundry, the water type and the supply voltage
may also affect the energy use and the duration of the drying pro‐
gramme.
Height x Width x Depth
Max. depth with the appliance door open
Max. width with the appliance door open
Adjustable height
Drum volume
Maximum load volume
Voltage
Frequency
Total power
Energy consumption
Annual energy consumption
Left—on mode power absorption
Off mode power absorption
Type of use
Type of tumble dryer
Possible solution
Make sure that the options are suitable
for the programme.
• Incorrect setting of the conductivity
sensor ( See chapter "
Adjustment of the remaining laundry
moisture degree " for better setting).
• The airflow slots are clogged.
• Room temperature is too low or too
high ( optimal room temperature 18°C
to 25°C )
850 x 600 x 600 mm (maximal 640 mm)
1090 mm
950 mm
850 mm (+ 15 mm - feet regulation)
118 l
8 kg
220-240 V
50 Hz
2800 W
4,83 kWh
774 kWh
0,05 W
0,05 W
Household
Condense
Settings -
Advertisement
Table of Contents
