Wisenet SNR-73207W User Manual
  1. Manuals
  2. Brands
  3. Wisenet Manuals
  4. Network Hardware
  5. SNR-73207W
  6. User manual
Wisenet SNR-73207W User Manual

Wisenet SNR-73207W User Manual

Hide thumbs Also See for SNR-73207W:
Table of Contents

Advertisement

Quick Links

NETWORK VIDEO RECORDER
User Manual
SNR-73207W

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SNR-73207W and is the answer not in the manual?

Questions and answers

jack rosete
February 24, 2025

Do I have to use the Internet with thi system, I prefer to use the system locally only

0
1 comments:
Mr. Anderson
February 24, 2025

Yes, the Wisenet SNR-73207W system can be used locally without an Internet connection. The specifications indicate that it operates on Linux and supports local video recording and display. The cloud service is an additional feature for remote access, but it is not required for local use.

This answer is automatically generated

0

Related Manuals for Wisenet SNR-73207W

Summary of Contents for Wisenet SNR-73207W

  • Page 1 NETWORK VIDEO RECORDER User Manual SNR-73207W...

  • Page 2: Table Of Contents

    Main Menu Guide Setup Registering with DDNS SHUTDOWN Menu Lock Switch User Split Mode Record Search Start Sequence SEARCH Search WISENET CLIENT System Environment Requirements Wisenet Client Login Live Interface APPENDIX Troubleshooting Specifications Dimension Open Source Announcement 2_ Overview of NVR...

  • Page 3: Safety Instruction

    SAFETY INSTRUCTION Please carefully read the following safety instruction so as to avoid personal injuries and prevent the equipment and other connection devices from being damaged. 1. Please use the power supply enclosed or specified by the manufacturer. Never operate the equipment by using unspecified power supply. 2.
  • Page 4 FCC / Industry Canada RF Exposure Statement -For This device must not be co-located or operation in conjunction with any other antenna or transmitter except complying with IC multi-transmitter requirements. -For camera This equipment complies with FCC / IC radiation exposure limits set forth for an uncontrolled environment.

  • Page 5: Front Panel

    Overview of NVR FRONT PANEL NVR is short for Network Video Recorder. a b c Type Key or indicator Identification Functions If the "Red" indicator flashes, the hard drive is being read or written to. REC indicator The red light will illuminate when HDD is installed. Status lamp Network indicator Display network connection and data transfer status.

  • Page 6: Rear Panel

    REAR PANEL SNR-73207W CAUTION RISK OF ELECTRI SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT OPEN COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING : TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE UNITS NOT SPECIFICALLY DESIGNED FOR OUTDOOR USE TO RAIN OR MOISTURE.

  • Page 7: Remote Controller

    Enter into record search menu/Play key Record key Stop manual record; stop playing Pause key There is no function of Mute button. SNR-73207W is a 4 channel NVR. Please press 1 to 4 key to select channel. 6_ Overview of NVR...

  • Page 8: Install Hard Drive

    INSTALL HARD DRIVE HDD is pre-installed. If you want to replace hard disk drive, please refer to the following instruction. Please do not remove the hard drive when NVR is operating. Installation of Hard Drive 1. Using a screwdriver, remove the screws from the side and back panels.

  • Page 9: Connect External Equipment

    Overview of NVR CONNECT EXTERNAL EQUIPMENT Connect your monitor to the NVR using the VGA or HDMI video cable. Connect NVR to the power supply adapter provided. After all connections are completed, plug the NVR in to perform function checks. The appearance of power adaptor differs depending on sales region.

  • Page 10: Nvr Boot Up

    NVR Boot up SYSTEM INITIALIZATION After connecting the NVR power cable to wall outlet, the NVR system initializing screen will appear. It may take 40 seconds to start up, and the screen may beep 5~6 times. LOGIN 1. The login dialog appears. 2.
  • Page 11 NVR Boot up Use Virtual Keyboard Virtual keyboard window will be displayed for input. Click on the desired characters to apply them. Press < > to switch to input of upper-case letters. Press < > again to switch to input of special characters. The virtual keyboard is used in the same way as with physical keyboard.
  • Page 12 4. Resolution : Select the resolution for the VGA output or HDMI output of your monitor. 5. Mobile : If you scan a QR code using WiseView, the device ID displayed in the NVR will be automatically reflected in the Mobile Viewer ID, and you can use the Mobile Viewer immediately by entering the password of the NVR.

  • Page 13: Main Interface

    NVR Boot up MAIN INTERFACE In real-time preview mode: right click on any area to access the desired menu. Right click on it to open a context menu, whose menu items may vary depending on the specific condition, such as sign-in, sign-out, split screen mode and various operation conditions. Left click on any channel to access shortcut menu, where operations such as image capture, recording and image zoom-in are available.
  • Page 14 Component Name Function Zoom Hold and drag mouse cursor to select a frame of current video to zoom in. Do the pairing of camera and NVR. Pair If you click the icon of each channel and press the Pair button on the camera within 30 seconds, the camera and NVR are manually paired.

  • Page 15: Nvr Menu

    NVR Menu POPUP MENU After finishing system initialization, right click the mouse on preview interface or slide the mouse to the bottom of screen to enter into Pop-up Menu. Now you could perform parameter setting and operate on Main Menu, Multi-screen, Record Search, Sequence and Brightness settings.

  • Page 16: Main Menu Guide

    MAIN MENU GUIDE Wireless Camera Channel Wireless Channel Live Channel Motion Video Cover Record Record Record Schedule Record Capture Capture Capture Schedule Motion Alarm Exception General General Port Configuration Setup Network DDNS Email Configuration Email Email Schedule Disk Device Cloud Storage General General Date and Time...

  • Page 17: Setup

    NVR Menu SETUP On LIVE mode, click the mouse left button, or [Menu] button on the remote controller, or click [ ] icon on the toolbar to enter the main menu screen. If system interface is locked, refer to page 33 to unlock by entering your password. In Main Menu mode, you can make settings for Parameter, Record Search, Device, System, Advanced and Shutdown.
  • Page 18 Live Go to "Setup" ; "Channel" ; "Live" to enter into the interface. • Covert : Enable/Disable Video hiding. • Channel Name : Set the channel name to be displayed on the live screen. • Show Name : Showing Channel name •...
  • Page 19 NVR Menu Motion Go to "Setup" ; "Channel" ; "Motion" to enter into the interface. • Channel : Select Channel. • Use : Sets the use of motion detection. You can select either Motion only or Motion And PIR. • Sensitivity : Support 1-8 level, 8 is the highest level. •...
  • Page 20 Record Record Go to "Setup" ; "Record" ; "Record" ; "Record" to enter into the interface. • Record : Enable/disable record • Resolution : Set the desired recording resolution. • Video Encode Type : Select the video compression method. Record Schedule Go to "Setup"...
  • Page 21 NVR Menu Capture Go to "Setup" ; "Record" ; "Capture" ; "Capture". • Channel : Select capture channel • Enable Capture : Enable/Disable auto capture. • Stream Type : Select MainStream or SubStream. • lnterval : 4s / 8s / 25s / 1Min / 10Min / 30Min / Hour •...
  • Page 22 Alarm Motion Go to "Setup" ; "Alarm" ; "Motion" to enter into the interface. • Buzzer : When detecting object moving, buzzer makes alarms (disable, 10 seconds, 20 seconds, 40 seconds and 60 seconds). • Record : When object motion is detected, the record channel setting will be activated.
  • Page 23 NVR Menu Network General Go to "Setup" ; "Network" ; "General" ; "General" to enter the interface. Select the network connection option (DHCP, Static) to set the port. User can view and do the recording, playback or backup of the video remotely. Take DHCP as an example.

  • Page 24: Registering With Ddns

    (e.g. 19010) REGISTERING WITH DDNS To register your product with the Wisenet DDNS 1. Visit the Wisenet DDNS web site (http://ddns.hanwha-security.com) and sign in with a registered account. 2. From the top menu bar, select <MY DDNS>.
  • Page 25 NVR Menu Email Email Configuration Go to "Setup" ; "Network" ; "Email" ; "Email Configuration" to enter into the menu interface. Receive or Send NVR alarm Email and set parameters like Email address, SSL, Email Enable, and Interval. • Encryption: Disable, SSL, TLS and Auto optional. Auto means it can detect the encryption type automatically.
  • Page 26 Click on "settings--Forwarding and POP/IMAP" Click on "Enable IMAP--Save Changes" E-mail Schedule Go to "Setup" ; "Network" ; "Email" ; "Email Schedule" to make Email schedule. Select the channel and the date to be set. One week's schedule can be set. The record schedule of the current channel can be copied to any other channel or all channels.
  • Page 27 NVR Menu Device Disk Go to "Setup" ; "Device" ; "Disk" to enter into the interface. When HDD is connected, the system will automatically detect if the HDD is OK or not; if the HDD needs to be formatted, select the HDD and format it.
  • Page 28 System General Go to "Setup" ; "System" ; "General" ; "General" to enter into the interface. User may set Device Name, Device ID, Language, Auto Logout, Session Timeout and Show Wizard on this page. Live restriction : If you want to use the permission setting of Live View when turning the power on/off, please check.
  • Page 29 NVR Menu Output Configuration Go to "Setup" ; "System" ; "General" ; "Output Configuration" to enter into the interface. • Video Output : Live Output • SEQ Dwell Time : Sequence time is set 5 seconds by default. User may set it as required up to 300 seconds •...
  • Page 30 User Edit User may enable or disable the function or set password. Maintenance Go to "Setup" ; "System" ; "Maintenance" ; "Log". User may search log information in different period of time. Click "Backup" to save all the log information. Load Default Go to "Setup"...
  • Page 31 NVR Menu Upgrade Go to "Setup" ; "System" ; "Maintenance" ; "Upgrade" to enter into the interface. Click Upgrade to enter the Device interface and select the updating file in USB to execute. Do not take out the USB memory or cut off the power during upgrading. When the update is done, system will be automatically restarted.
  • Page 32 Auto Reboot Go to "Setup" ; "System" ; "Maintenance" ; "Auto Reboot" to enter into the interface. Enable the auto maintenance function to reboot system regularly at every day/week/month. When Auto Reboot is enabled, NVR should be in the main interface and no user operation. The auto maintain function can be effective only when NVR returns back to Preview mode with no any operation within the set auto maintain time.
  • Page 33 NVR Menu Information Information Go to "Setup" ; "System" ; "Information" ; "Information" to enter into the interface. Network State Go to "Setup" ; "System" ; "Information" ; "Network State" to enter into the interface. Displays the network connection status. 32_ NVR Menu...

  • Page 34: Shutdown

    SHUTDOWN Click [ ] icon ; "Shutdown" to enter into the interface. MENU LOCK In consideration of system safety, user may click the icon [ ] on the toolbar when he leaves away from NVR and the system interface will be locked.

  • Page 35: Search

    Search Search SEARCH Record Search General Go to "Search" ; "General" to enter into the interface. • Search Type: Select the type the playback record. There are three options: All, Normal and Motion. • Channel: Select the channel you want to search. •...
  • Page 36 • Detailed Operation Fixed time axis: If you select [ ] option, that means the processing control bar covers two hour of video content. The time range refers to 1 hour before and after the middle point. • Clip and backup: When it is playback, the [ ] icon will appear in the Play Control bar.
  • Page 37 Search Play Backup Files To play the backup file, please download and install SVideo Player from www.wisenetlife.com. Use of any other player may cause compatibility problem. 1. Copy backup files to the computer. 2. Open SVideo player and click [ + ] or [ For example, if you want to choose *.264, *.avi, *.mp4, add backup file and select a file to play.
  • Page 38 Capture Settings: Set the path to save image Sub-periods Go to "Search" ; "Sub-periods" to enter into the interface. Picture Go to "Search" ; "Picture" Support search picture for 5000pcs each time. If the picture number greater than this value, please adjust the date (time) of the current search and search again.

  • Page 39: Wisenet Client

    Ethernet Adapter 10/100M Ethernet Adapter WirelessPlugin Download and Installation If your computer system is Windows 7, you may need to setup the user authority for remote control, or you may be unable to backup or record. WIN7 38_ Wisenet Client...
  • Page 40 Download and installation of WISENET CLIENT for IE 1. Download WISENET CLIENT at Wisenetlife.com. 2. Locate the downloaded WISENET CLIENT program and double click on it. 3. When the program opens, click the [Next >] button. 4. Click on "Install" in the dialog box "WISENET CLIENT Setup".
  • Page 41 Download and installation of WISENET CLIENT for Mac SAFARI 1. Download WISENET CLIENT at Wisenetlife.com. 2. Locate the downloaded "WISENET CLIENT XXX.dmg" and double click on it. 3. Install the plugin by double clicking on "WebPlugin.pkg". 4. Click on "Continue" > "Install". Enter user name and password for login to Apple computer. Click on "Install" > "Shut down"...

  • Page 42: Wisenet Client Login

    5. Run the WISENET CLIENT to bring up the Login screen. WISENET CLIENT LOGIN After plugins installation, please input user name, password and input Client port number. There is an option for opening all channel preview, select it to open all live pictures. Press Login to log in client and remotely visit NVR.
  • Page 43 : Capture the selected live image and save it to a specified position on PC. The image is saved as *.bmp format. : Digital ZOOM. Video Control Hue: Adjust the chromaticity of video Bright: Adjust the brightness of video Contrast: Adjust the contrast of video Saturation: Adjust the saturation of video 42_ Wisenet Client...
  • Page 44 Playback Click [ ] to enter into Playback interface to remotely view the records in NVR HDD. It supports 1 to 4 channel record playback. Record Search Record playback procedure Firstly, select the date you want to check and tick 1 to 4 channels. Any record files in current channel at current date will be displayed in the status bar of the interface.
  • Page 45 Tick-select the record file you want to download and click [Start download]. System will download the record file in sequence and save to local PC. The downloading file will be displayed in percentage form. After downloading finishes, "Complete" will be displayed on the status bar. 44_ Wisenet Client...
  • Page 46 Remote Setting Click Remote Setting to enter into the interface shown, including Display, Record, Alarm, Network, Device and System. Display When you click the <Display> option, sub-options of Display Settings and Schedule are displayed. Channel You can set the IP Channel of the camera. Live Displays the currently playing live screen.
  • Page 47 This menu allows you to configure the recording video or network transmission picture quality. Record Record Parameters The parameters should be consistent with NVR local setting. Record Schedule The parameters should be consistent with NVR local setting. Green stands for Normal record; Yellow stands for Motion detection. 46_ Wisenet Client...
  • Page 48 Capture Capture • Channel: Select channel. • Stream Type : Select MainStream or SubStream. • lnterval : 4s / 8s / 25s / 1Min / 10Min / 30Min / 1Hour • Auto Capture: Enable/Disable auto capture. • Manual Capture: Enable/Disable manual capture. Capture Schedule •...
  • Page 49 Details settings, including server address, host, user, and password, should be consistent with NVR local setting. Click on "Test DDNS". If connection succeeds, it will be indicated that "DDNS Test is Successful! 48_ Wisenet Client...
  • Page 50 Email Email: Set NVR alarm Email configuration parameters, including Email address, Encryption, Email Enable, and Interval etc. Detailed parameters should be consistent with NVR local setting. HTTPS • Enable : Enable/Disable • Certificate Type : Default/Custom Device Click <Device> to unfold its sub-options: HDD User may check HDD status of NVR and overwritten time.
  • Page 51 User may configure user name and password and detailed setting should be consistent with NVR local setting. Maintenance Load Default User may remotely restore default parameters of NVR, with same setting method as that of NVR. Firmware Update User may remotely update NVR system. 50_ Wisenet Client...
  • Page 52 Auto Reboot Allow you remotely set auto maintain time for NVR. Detailed setting should be consistent with NVR local setting. Info Info User may search device name, device number, device type, MAC address, software version, IE version and hardware version of NVR. Channel Info Displays all channels camera relevant information.

  • Page 53: Appendix 52 Troubleshooting

    Appendix Appendix TROUBLESHOOTING Symptom Countermeasures • Check if the power supply system is properly connected and data cord and power cables are securely What can I do if the system does not detect connected, and if something wrong with the HDD interface. Or you may check if your HDD is supported the HDD? by referring to the specifications or descriptions.
  • Page 54 Usage Maintenance 1. To shut down NVR, please firstly shut down the system and then turn off the power. Do not turn off the power directly or HDD data will be lost or damaged. 2. Please keep NVR away from heat sources or places. 3.

  • Page 55: Specifications

    Appendix SPECIFICATIONS SNR-73207W Item Details Description Resolution 1920x1080p (2MP) Video Inputs 4CH (Wireless video transmission) Resolution 1920x1080p (2MP) Max 80 fps@2MP Live Frame rate Auto fps Max 20 fps@2MP/CH, Bitrate : Auto Multi Screen display 1 / 4 / SEQ...
  • Page 56 Item Details Max. remote users 7 (Admin 1, User 6) - Main stream : H.265/264 selectable Max 20fps@2MP/CH, Bitrate : Auto Network Live stream - Sub stream : H.264 fixed Max 10 fps@1280x720 2channel Max 10 fps@640x480 Others channel Protocol support TCP/IP, UDP/IP, RTP(UDP), RTP(TCP), RTSP, NTP, HTTP, DHCP, SMTP, DNS, DDNS Support Monitoring...

  • Page 57: Dimension

    Appendix DIMENSION Unit: mm (inch) 300 mm (11.81") 48 mm (1.88") 56_ Appendix...

  • Page 58: Open Source Announcement

    OPEN SOURCE ANNOUNCEMENT The software included in this product contains copyrighted software that is licensed under the GPL, LGPL, Zlib/libpng License, Curl License, Open SSL Combined License. You may obtain the Corresponding Source code from us for a period of three years after our last shipment of this product. If you want to obtain the Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution might be charged.
  • Page 59 10. If you wish to incorporate parts of the Program into other free c) Accompany it with the information you received as to the offer to programs whose distribution conditions are different, write to the author distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the to ask for permission.
  • Page 60 GNU GENERAL PUBLIC LICENSE To “convey” a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with a user through a computer network, with no transfer of a copy, is not conveying. Version 3, 29 June 2007 An interactive user interface displays “Appropriate Legal Notices”...
  • Page 61 4. Conveying Verbatim Copies. A “User Product” is either (1) a “consumer product”, which means any tangible personal property which is normally used for personal, family, or You may convey verbatim copies of the Program’s source code as you household purposes, or (2) anything designed or sold for incorporation receive it, in any medium, provided that you conspicuously and into a dwelling.
  • Page 62 If you add terms to a covered work in accord with this section, you must If you convey a covered work, knowingly relying on a patent license, and place, in the relevant source files, a statement of the additional terms that the Corresponding Source of the work is not available for anyone to apply to those files, or a notice indicating where to find the applicable copy, free of charge and under the terms of this License, through a...
  • Page 63 FITNESS FOR A PARTICULAR PURPOSE. 1. Redistribution of source code must retain the above copyright notice, this list of conditions and the following disclaimer. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE 2.
  • Page 64 1. You may copy and distribute verbatim copies of the Library’s complete library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate To protect each distributor, we want to make it very clear that there is no copyright notice and disclaimer of warranty;...
  • Page 65 work of the Library even though the source code is not. parties remain in full compliance. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to 9.
  • Page 66 AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF...
  • Page 67 Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Hanwha Techwin's devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive.
  • Page 68 Tel : +82.1588.5772 Fax : +82.31.8018.3740 www.wisenetlife.com Hanwha Techwin America 500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666 Tel +1.844 WISENET (844.947.3638) www.wisenetlife.com Hanwha Techwin Europe Heriot House, Heriot Road, Chertsey, Surrey, KT16 9DT, United Kingdom Tel#1 00800.8010.8022 Tel#2 +31.(0)13.5792.790...

Table of Contents

Save PDF