● Live monitoring of the network camera ● Installation Wizard Function (Recorder, Web Viewer) ● Supports the remote monitoring feature by DDNS/P2P support (Wisenet Viewer/Wisenet mobile) ● Provides smartphone event alarm (sending real-time event messages) CAUTION ● RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
If you are adding a new or previously used HDD to this product in addition to the HDD(s) originally installed, format the new HDD manually in the set before use. To learn how to format, see "Device/Format" in the User Manual. ■ If you wish to replace or add an HDD, contact your dealer or our customer service first. QRN-1630S/XRN-815S Recorder Mouse Power Cable ■...
QRN-830S Installation Wizard Setup As shown below, proceed through each step of the <Installation wizard>. Install Wizard can only be accessed at Loosen the screws on the back and slide the Use the screws to fix the hard disk to the bottom factory reset.
※ Click < > to view the basic guide for setting a password. Refer to the password setup rules. ※ When the password is in factory reset, it can be changed and managed in a batch. ※ Up to 3 sets of camera ID with password and password can be registered. ※...
Channel Setting ※ It connects to Wisenet DDNS first. If it does not connect to DDNS, it automatically connects to P2P. You can view the camera videos registered to each channel in split mode along with thumbnail information. To Click <Finish>...
Explore Screen Configuration Record Setup The recorder screen consists of the following. You can set resolution, IPS, and quality of recordings by channel, and by recording type of standard / event. You can check frame rates and data transfer amount of Full Frame and Key Frame recordings for each channel, and ■...
Page 8
Set up and Run the Layout 2-1 Search The layout set on the live screen can also be used for time search and can be searched and played according to the channel order and channel combination set by the user. ■...
Page 9
Using Product Information Export recorded video You can check the product information/manual/firmware information/FAQ/HDD compatibility list on the homepage or mobile web of your smartphone. http://hanwha-security.com http://hanwha-security.com Click < > at the bottom of the screen. Select a layout. Select a channel. Set the time, device, and format for export.
Page 10
When the connection is successful, a QR code is created. ■ It connects to Wisenet DDNS first. If it does not connect to DDNS, it automatically connects to P2P. Then, when you run the "Wisenet mobile" app, it will be automatically connected to the recorder and...
Select <IP type> to <DDNS/P2P> in the "Settings > Device > Device list > Add > Manual" menu. recorder. Enter the recorder ID/password and <Product ID>, and then click <Register>. The information of the current recorder will be displayed, and you can use the "Wisenet Viewer" app. Connecting the cable IP Router...
Checking the recorder connection from the PC Enter the IP set in the recorder menu in the local PC address bar. Once you log in by entering your user name and password, the recorder’s web viewer screen will appear. System requirements The following lists the minimum suggested hardware and operating system requirements needed to run the Web Viewer.
Page 13
Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Hanwha Techwin's devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive.
Need help?
Do you have a question about the QRN-1630S and is the answer not in the manual?
Questions and answers