Advertisement
Quick Links
Advertisement
Related Manuals for KAYO MOTO AT125-2
Summary of Contents for KAYO MOTO AT125-2
- Page 1 KAYO MOTO AT125-2 Assembly Manual WWW.KAYOMOTO.COM...
- Page 3 1.The picture on the left shows the tools required for unpacking & assembling the vehicle as below ① Torque wrench ② 14mm socket ③ 13mm socket ④ 12mm socket ⑤ 6mm hexagon socket ⑥ Scissors ⑦ No. 13 wrench ⑧ No. 12-14 wrench ⑨...
- Page 4 The picture above shows the parts in the accessory box. Please read the instruction manual (A) carefully before assembling and install these parts according to the operation steps. Name Quantity User’s manual Air pressure gauge Cable tie Rear reflector Rear reflector mounting plate Padding Spark plug socket Battery strap...
- Page 5 8. Use tool ⑧⑨ to remove the fixing bolts of the Use tool ①②⑦ to tighten the rear shock iron frame and the rear axle. absorber bolt & nut(O). Note: Torque requirement 49-59N.m 9. Use tool ⑩ to tighten the nuts and washers 10.Use tool ①④⑫...
- Page 6 13.Use tool ①④⑧⑫ to tighten bolts and nuts(L) for the front guard. Note: Torque requirement 25-30N.m 14.Please refer to user’s manual (A) for air pressure requirements. Use compressed air to inflate the tires, and use the air pressure gauge (B) to inflate to the standard value of 5psi.
- Page 7 17.Take out the battery, according to the user’s 18.Pull the latch as above shown and remove the manual (A), first tear off the seal on the battery, seat cushion, waiting for the subsequent add electrolyte, then install the battery cover installation of the battery.