Advertisement
Quick Links
Advertisement
Related Manuals for KAYO MOTO A150
Summary of Contents for KAYO MOTO A150
- Page 1 KAYO MOTO A150 Assembly Manual WWW.KAYOMOTO.COM...
- Page 3 ① Torque wrench ② 27mm socket ③ 6mm hexagon socket ④ 17mm socket ⑤ 12mm socket ⑥ 14mm socket ⑦ Phillips screwdriver ⑧ Needle nose pliers ⑨ Additional rod for electric wrench socket ⑩ No. 10-12 wrench ⑪ No. 8 T-socket ⑫...
- Page 4 4. The parts shown above need to be subsequently installed on the vehicle. Name Quantity A Rubber dust cap B Spark plug socket C Air pressure gauge D Cable tie E Bracket for gear indicator cover F Rear L&R reflector Bracket G Rear wheel cotter pin 4*28...
- Page 5 8. Use tool ⑦ to install the combination switch 7. Use tool ⑦ to tighten screws for gear indicator cover(M) 9. Use tool ⑩⑫ to remove the screws fixed on 10. Put the vehicle on the stand for easy the rear axle installation of other accessories.
- Page 6 11. Install the slotted nut and washer(K), use tool ①④ to tighten, and insert the cotter pin(K), the bending angle is greater than 180°. (torque requirement 49-59N.m) 14. Install the front wheel on the front hub and use tool ①⑥ to tighten the screw with lock nut M10*1.25(H) and install rubber dust cap(A).
- Page 7 16. Take out rear L&R reflector bracket(F) from 15. Align the rear wheel with the splines and the accessory box and use tool ①⑤⑨ to tighten push on the rear axle, with the air nozzle cap the screws(L) of the reflector bracket and install facing outward, install the slotted nut, dust cap the reflector.
- Page 8 19. Take out the battery, according to the user’s 20. Pull the latch as above shown and remove the manual, first tear off the seal on the battery, add seat cushion, waiting for the subsequent electrolyte, then install the battery cover, and installation of the battery.
- Page 9 23. Unscrew the fuel tank cap, add gasoline, 24. Please read the user’s manual (I) carefully and tighten the fuel tank cap clockwise. before riding to better understand the performance of the vehicle.