Advertisement
Quick Links
Advertisement
Related Manuals for KAYO MOTO A180
Summary of Contents for KAYO MOTO A180
- Page 1 KAYO MOTO A180 Assembly Manual WWW.KAYOMOTO.COM...
- Page 3 ①Torque wrench ② 27mm socket ③ 6mm hexagon socket ④ 17mm socket ⑤ 12mm socket ⑥ 14mm socket ⑦ Phillips screwdriver ⑧ Needle nose pliers ⑨ Additional rod for electric wrench socket ⑩ No. 10-12 wrench ⑪ No. 8 T-socket ⑫...
- Page 4 Name Quantity A Front brake disc B Rubber dust cap C Rear L&R reflector Bracket D User’s manual E Air pressure gauge F Bracket for gear indicator cover G Spark plug socket H Cable tie Front brake flange bolt M8*25 6.
- Page 5 8. Use tool ⑦ to tighten the rear reflector bracket 9. Use tool ⑦ to install the combination switch bolt (T). 10. Use tool ⑩⑫ to remove the screws fixed on the 11. Put the vehicle on the stand for easy rear axle, and then use tool ⑧...
- Page 6 14. Install front brake disc(A) on the steering 15. Install the front disc brake caliper on the knuckle, use tool ①⑮ to tighten slotted nut(J), and steering knuckle, use tool ①⑤⑨ to fasten the insert the cotter pin(J), the bending angle is greater front brake bolt, spring washer, washer (I) than 180°.
- Page 7 18. Align the rear wheel with the splines and push 19. Use tool ①⑤ to tighten the front bumper on the rear axle, with the air nozzle cap facing bolt(R). (torque requirement is 25-30 N m) outward, install the slotted nut, dust cap washer and spring washer(N), and use ①②...
- Page 8 22. Pull the latch as above shown and remove the 23. Use tool ⑩⑬ to remove the battery holder, seat cushion, waiting for the subsequent installation install the battery and fix the battery holder, of the battery. connect the positive and negative poles as shown in the picture, use tool ⑦...