Advertisement
Step 4
Lastly, make any needed adjustments for proper fit
up and tighten all bolts down. The bolts holding
down the mounting brackets can be easily accessed
through four holes in the top plate. See Fig. 5.
You're all set!
Bolt Kit
4 -
8x65mm SH bolts
4 -
8x40mm SH bolts
4 -
8x20 FH bolts
4 -
8mm nylock nuts
8 -
8mm flat washers
Recommended Tools
6mm Allen wrench
5mm Allen wrench
45 Torx wrench
13mm box end wrench
Fig 5
Included Hardware
Top plate
Mounting brackets (2)
Bolt kit
2
2/28/20
Rev 1
JH
Advertisement
