LogTag UTRED30-16 Product User Manual page 48

Stopping the UTRED30-16
Stopping the UTRED30-16
Automatically
The UTRED30-16 automatically stops recording temperature when the maximum number
of readings specified during configuration has been reached. Your unit can also be set up
to stop automatically when it is downloaded. This option needs to be set up at the
factory and cannot be changed during configuration with LogTag
distributor can supply more information about this option.
Manually
You can configure a UTRED30-16 so it can be stopped with the
This feature is useful when you take the logger out of a shipment and don't want to
falsify the statistics with readings taken after the shipment completion. The stop
function is enabled in the
following will stop the unit:
Press and hold the
STOPPED
Keep holding the button until the
disappears, then release the button within 2
seconds.
STOPPED
the logger will no longer take readings.
1.800.544.2843
Advanced Settings
START
/CLEAR/STOP
is shown in addition to the
is shown permanently on the display and
www.calcert.com
15
10 20
5 25
0 30
UTRED30-16 User Guide
tab during configuration. When enabled,
button.
symbol.
symbol
®
Analyzer. Your
button.
START
/CLEAR/STOP
sales@calcert.com
50