Curtiss-Wright DuraNET 3300 User Manual
  1. Manuals
  2. Brands
  3. Curtiss-Wright Manuals
  4. Switch
  5. DuraNET 3300
  6. User manual

Curtiss-Wright DuraNET 3300 User Manual

Rugged cisco ess-3300 l2/l3 ethernet switch 24x 1000base-t w/poe+ and 2x 10gbase-sr
Hide thumbs
Table of Contents

Advertisement

Quick Links

USER MANUAL
DuraNET 3300
Rugged Cisco ESS-3300 L2/L3 Ethernet Switch
24x 1000BASE-T w/PoE+ and 2x 10GBASE-SR

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DuraNET 3300 and is the answer not in the manual?

Questions and answers

Related Manuals for Curtiss-Wright DuraNET 3300

Summary of Contents for Curtiss-Wright DuraNET 3300

  • Page 1 USER MANUAL DuraNET 3300 Rugged Cisco ESS-3300 L2/L3 Ethernet Switch 24x 1000BASE-T w/PoE+ and 2x 10GBASE-SR...
  • Page 2 Curtiss-Wright reserves the right to change the contents and form of this document, as well as the features and specifications of its products, at any time without notice.

  • Page 3: Table Of Contents

    User Manual – DuraNET 3300 Table of Contents Table of Contents Table of Contents ........................3 List of Figures ........................... 5 List of Tables ..........................6 Chapter 1 Introduction ......................7 About This Document ............................ 7 Manual Organization ..........................7 Definitions ...............................
  • Page 4 Minicom Client Install and Setup - Ubuntu ....................78 iperf Install and Setup – Linux Ubuntu ......................79 Automated Diagnostic Software Install and Execute .................. 80 DuraNET 3300 Port to Cisco Name Mapping ..................... 82 Glossary ..........................83 Page 4 of 84...

  • Page 5: List Of Figures

    User Manual – DuraNET 3300 List of Figures List of Figures Figure 1.1: DuraNET 3300 Architecture Block Diagram ................12 Figure 2.1: Cable Diagram .......................... 15 Figure 2.2: Minicom Term ........................... 16 Figure 2.3: Minicom Serial Setup ........................ 16 Figure 2.4: Minicom Baud ........................... 17 Figure 2.5: Minicom Default ........................

  • Page 6: List Of Tables

    Table 1.3: Production System Configurations ..................... 11 Table 1.4: Production Breakout I/O Cable Configurations ................11 Table 2.1: DuraNET 3300 Breakout Cables, Cisco Ports and Port Labels ..........13 Table 2.2: Physical Cable Labels vs Cisco Port Numbers/Long Names ............ 14 Table 3.1: EAU Connector Identification &...

  • Page 7: Chapter 1 Introduction

    Chapter 3 contains connector pinouts and part numbers for all external connectors and their mating connector • Chapter 4 explains how to operate the DuraNET 3300. It describes the system connectors and cables, and includes procedures for starting the system, and usage of the zeroization capabilities. •...

  • Page 8: Functional Description

    Cisco IOS® software. The DuraNET 3300 serves as an ideal high bandwidth connectivity solution for size, weight, power and cost (SWaP-C)-sensitive vehicle and aircraft platforms exposed to harsh environmental and noisy conditions (e.g.

  • Page 9: Features

    User Manual – DuraNET 3300 Introduction Features • Small form factor L2/L3 Ethernet Switch • 24x ports of Gigabit 1000BASE-T (copper) interfaces + optional 2 x ports of 10 Gigabit 10GBASE- SR (fiber optic) ports for trunking / uplinks / long hauls / EMI immunity. USB 2.0 console, RS232 console, zeroize discrete input, and optional 50ms holdup for core switch (not for PoE power) •...

  • Page 10: Configurations

    461F, MIL-STD- 1275D, MIL-STD-704F, CE Mark, RTCA/DO-160 Configurations Details on DuraNET 3300 Early Access Unit (EAU) and Production configurations follow. Both EAUs and Production units share the same form factor and function, but have different power connectors and external connector coatings.

  • Page 11: Table 1.3: Production System Configurations

    Product Number Description Starter cable set for DuraNET 3300, 24 x GbE, Mating Circular Connectors to CBL-NET-3300-01 RJ-45/USB/DB9 Starter cable set for DuraNET 3300, 24 x GbE, 2 x 10G, mating circular CBL-NET-3300-02 connectors to RJ-45/USB/DB9/Fiber-LC MNL-0676-01 Rev A4 ECO- N/A...

  • Page 12: Architecture Block Diagram

    User Manual – DuraNET 3300 Introduction Architecture Block Diagram Figure 1.1: DuraNET 3300 Architecture Block Diagram Page 12 of 84 MNL-0676-01 Rev A4 ECO- N/A Effective: 26 Feb 21...

  • Page 13: Chapter 2 Quick-Start Guide

    Chapter 2 Quick-Start Guide This section describes the physical configuration and quick-start operational testing of the DuraNET 3300. You will need two computers with at least a single USB port and single network connection. Tables 2.1 and Table 2.2 list the relationship between cables, cable port labels, and Cisco port definitions.

  • Page 14: Starter Breakout Cable Sets

    Gi2/14 Gigabitethernet2/14 Starter Breakout Cable Sets Cable sets are made of the following individual cable assemblies: • CBL-2883-01 CBL LAB DURANET 3300 POWER J1 80IN • CBL-2884-01 CBL LAB DURANET 3300 8X1G J2 80IN • CBL-2885-01 CBL LAB DURANET 3300 16X1G J3 80IN •...

  • Page 15: Cable Install And Connections

    Cable Install and Connections Figure 2.1: Cable Diagram 1. Connect a power cable (CBL-2883-01) to port J1 on the DuraNET 3300 and the other end of the cable to the unpowered DC power source. 2. Connect network cable (CBL-2884-01) to port J2 on the DuraNET 3300 a.

  • Page 16: Accessing The Cli Through The Console Port

    RS-232 Console Port Software Terminal Emulator and Serial Console Setup Prior to communicating with the DuraNET 3300, software installation and setup must be performed to ensure proper communication. The installation instructions will be tailored for both Windows 10 and Linux operating systems for multi-user preference and experience.

  • Page 17: Figure 2.4: Minicom Baud

    User Manual – DuraNET 3300 Quick-Start Guide • Under setup option enter E and change the Bps/Par/Bits to ▪ 9600 8N1 Figure 2.4: Minicom Baud • Then save as default and exit Figure 2.5: Minicom Default • To confirm correct configuration and communication link ▪...

  • Page 18: Windows

    User Manual – DuraNET 3300 Quick-Start Guide Windows: First-time use of Windows will require installation of a USB driver, terminal emulator, console and IP address setup. • USB Driver ▪ Connection of either the USB or RS232 console cables will initiate an auto USB CP2102 driver load.

  • Page 19: Figure 2.7: Putty Destination

    User Manual – DuraNET 3300 Quick-Start Guide The installer then asks for the Destination folder in which to install the software. Almost always it is best to use the default value. Just click Next. Figure 2.7: PuTTY Destination Then, the installer asks to select product features to install. You probably want to add a shortcut on the desktop if you expect to use the software frequently.

  • Page 20: Figure 2.9: Putty Completed

    User Manual – DuraNET 3300 Quick-Start Guide When the installation has completed successfully, it should show a "Completed" screen. Click Finish to exit the installer. Figure 2.9: PuTTY Completed Page 20 of 84 MNL-0676-01 Rev A4 ECO- N/A Effective: 26 Feb 21...

  • Page 21: Running Putty

    At this point, you need to confirm the COM port connection being used for the CLI console from the DuraNET 3300. Navigate to Device Manager on your PC and select “Ports (COM & LPT) to display the COM port connection.

  • Page 22: Figure 2.12: Putty Configuration With Com

    From the PuTTY configuration window select Serial and enter the COM port number then select Open. You should now be connected to the DuraNET 3300 Console. Figure 2.12: PuTTY Configuration with COM # Press the <Enter> key to display the DuraNET 3300 console prompt Switch> Figure 2.13: Console Prompt Page 22 of 84...
  • Page 23 User Manual – DuraNET 3300 Quick-Start Guide Setting static IP address Instruction for setting a static IP address can also be found here: • https://stevessmarthomeguide.com/setting-up-static-ip-address-windows-10/ To set up a static address. 1. Click on the Windows icon 2. Click the Settings icon 3.
  • Page 24 User Manual – DuraNET 3300 Quick-Start Guide 4. In the Network status pane locate the change adapter options link and click it Page 24 of 84 MNL-0676-01 Rev A4 ECO- N/A Effective: 26 Feb 21...
  • Page 25 User Manual – DuraNET 3300 Quick-Start Guide 5. You should now see your network adapters. If your PC is equipped with two, as most are, then only use one and disable the other. The Ethernet adapter is being used and the Wi-Fi adapter is disabled.
  • Page 26 User Manual – DuraNET 3300 Quick-Start Guide 7. Use the scroll bar to locate TCP/IPv4 and click it to highlight and then click the properties button. Page 26 of 84 MNL-0676-01 Rev A4 ECO- N/A Effective: 26 Feb 21...
  • Page 27 User Manual – DuraNET 3300 Quick-Start Guide If you are using DHCP then you should see a screen like the one below. You can uncheck the automatic assignment of IP address and or DNS server address. Then enter your own details as show below:...
  • Page 28 User Manual – DuraNET 3300 Quick-Start Guide Page 28 of 84 MNL-0676-01 Rev A4 ECO- N/A Effective: 26 Feb 21...

  • Page 29: Setting An Open Firewall Port

    User Manual – DuraNET 3300 Quick-Start Guide Setting an Open Firewall Port To allow pings and data communication between the network port of this PC and the world we need to open a Firewall Port. • Open the Control Panel •...
  • Page 30 User Manual – DuraNET 3300 Quick-Start Guide • Windows Defender Firewall • Advanced Settings Page 30 of 84 MNL-0676-01 Rev A4 ECO- N/A Effective: 26 Feb 21...

  • Page 31: Usb Console Port

    User Manual – DuraNET 3300 Quick-Start Guide • In the left panel ▪ Inbound Rules ▪ Enable both File and Printer Sharing (ICMPv4-In) This completes opening the firewall port and you can now close all the open windows. USB Console Port Physically connect the USB cable from the J2 cable set to a USB port on the PC.

  • Page 32: Windows

    User Manual – DuraNET 3300 Quick-Start Guide Windows: • Identify the COM port assigned to the selected USB port by performing the following windows commands Start Control Panel System Device Manager Ports (COM & LPT) ▪ Silicon Labs CP210x USB to UART Bridge (COM#) •...

  • Page 33: Recommended Settings

    ▪ switch> Figure 2.15: DuraNET 3300 switch> prompt Recommended Settings Each time the DuraNET 3300 is zeroized, the settings listed below are cleared. It is recommended to reenable these settings with the following commands: enable config t license smart reservation...

  • Page 34: Chapter 3 Connector Descriptions

    Connector Descriptions Chapter 3 Connector Descriptions This chapter identifies the pinouts and signal descriptions for the DuraNET 3300. It also provides connector part numbers along with suggested mating connector details as necessary. Early Access Units (EAU) and Production Units have different external connector coatings and power input connector.

  • Page 35: Connector Pinouts

    Connector Pinouts This section provides the pinouts necessary for creating cables to connect to this assembly. If custom cabling is not designed and built by Curtiss-Wright, all EMI and EMC consideration must be handled by the customer. Note: EAU and Production cable pinouts are identical other than the power connector.

  • Page 36: J1 Power Connector

    User Manual – DuraNET 3300 Connector Descriptions J1 Power Connector Table 3.3: J1 EAU Connector Information Recept- Recept- Wire acle # of Panel Connector Mating Cable Connector acle Gauge Used Pins Part Number Part Number Label # (AWG) Phoenix Contact 1027478...

  • Page 37: Figure 3.4: J1 Production Pin Arrangement

    User Manual – DuraNET 3300 Connector Descriptions Table 3.5: Phoenix Power Cables Phoenix Part Number Description 1414773 1.5 Meter Power Cable 1414791 3 Meter Power Cable 1414807 5 Meter Power Cable 1414824 10 Meter Power Cable Table 3.6: J1 Production Connector Information...

  • Page 38: J2 Copper I/O Connector

    User Manual – DuraNET 3300 Connector Descriptions J2 Copper I/O Connector J2 supports GbE ports 1-8, the USB console port, the RS232 console port, and the zeroize discrete input. Table 3.8: J2 EAU Connector Information Recept- Recept- Wire # of...
  • Page 39 User Manual – DuraNET 3300 Connector Descriptions Signal Function Signal Function VBUS USB VBUS Sense GBE_P6.MDI3_P GBE Port 6 VBUS_GND USB VBUS Ground GBE_P6.MDI2_P GBE Port 6 No Connect GBE_P6.MDI1_P GBE Port 6 USB Ground GBE_P6.MDI0_P GBE Port 6 USB_P...

  • Page 40: Table 3.11: J2 Connector Pinout - By Function

    User Manual – DuraNET 3300 Connector Descriptions Signal Function Signal Function GBE_P7.MDI0_P GBE Port 7 No Connect GBE_P7.MDI0_N GBE Port 7 No Connect GBE_P5.MDI3_N GBE Port 5 GBE_P4.MDI3_P GBE Port 4 GBE_P5.MDI2_N GBE Port 5 GBE_P4.MDI2_P GBE Port 4 GBE_P5.MDI1_N GBE Port 5 GBE_P4.MDI1_P...
  • Page 41 User Manual – DuraNET 3300 Connector Descriptions Signal Function Signal Function GBE_P2.MDI3_P GBE Port 2 GBE_P8.MDI0_P GBE Port 8 GBE_P2.MDI3_N GBE Port 2 GBE_P8.MDI0_N GBE Port 8 GBE_P3.MDI0_P GBE Port 3 GBE_P8.MDI1_P GBE Port 8 GBE_P3.MDI0_N GBE Port 3 GBE_P8.MDI1_N GBE Port 8 GBE_P3.MDI1_P...

  • Page 42: J3 Copper I/O Connector

    User Manual – DuraNET 3300 Connector Descriptions J3 Copper I/O Connector J3 supports GbE ports 9-24. Table 3.12: J3 EAU Connector Information Recept- Recept- Wire acle # of Panel Connector Mating Cable Connector acle Gauge Used Pins Part Number Part Number...
  • Page 43 User Manual – DuraNET 3300 Connector Descriptions Signal Function Signal Function GBE_P9.MDI2_N GBE Port 9 P14.MDI0_P GBE Port 14 GBE_P9.MDI1_N GBE Port 9 P22.MDI0_N GBE Port 22 GBE_P9.MDI1_P GBE Port 9 P22.MDI1_N GBE Port 22 GBE_P24.MDI3_P GBE Port 24 P23.MDI3_N GBE Port 23 GBE_P24.MDI3_N...
  • Page 44 User Manual – DuraNET 3300 Connector Descriptions Signal Function Signal Function GBE_P13.MDI1_N GBE Port 13 P21.MDI3_N GBE Port 21 GBE_P12.MDI3_P GBE Port 12 P17.MDI3_P GBE Port 17 GBE_P12.MDI2_P GBE Port 12 P17.MDI0_P GBE Port 17 GBE_P12.MDI1_P GBE Port 12 ISO_P17.MDI1_P GBE Port 17 GBE_P12.MDI0_P...

  • Page 45: Table 3.15: J3 Connector Pinout - By Function

    User Manual – DuraNET 3300 Connector Descriptions Table 3.15: J3 Connector Pinout – By Function Signal Function Signal Function GBE_P9.MDI0_P GBE Port 9 P17.MDI0_P GBE Port 17 GBE_P9.MDI0_N GBE Port 9 P17.MDI0_N GBE Port 17 GBE_P9.MDI1_P GBE Port 9 P17.MDI1_P GBE Port 17 GBE_P9.MDI1_N...
  • Page 46 User Manual – DuraNET 3300 Connector Descriptions Signal Function Signal Function GBE_P13.MDI2_P GBE Port 13 P21.MDI2_P GBE Port 21 GBE_P13.MDI2_N GBE Port 13 P21.MDI2_N GBE Port 21 GBE_P13.MDI3_P GBE Port 13 P21.MDI3_P GBE Port 21 GBE_P13.MDI3_N GBE Port 13 P21.MDI3_N GBE Port 21 GBE_P14.MDI0_P...

  • Page 47: J4 Optical I/O Connector

    User Manual – DuraNET 3300 Connector Descriptions J4 Optical I/O Connector J4 supports 10GBASE-SR optical ports 1-2. Table 3.16: J4 Connector Information Receptacle Receptacle # of Fiber Panel Connector Mating Cable Connector Used For Label # Pins Rating Part Number...

  • Page 48: Chapter 4 Operational Description

    Configure IP Address, User Name and Password In order to configure and set parameters of the DuraNET 3300 via the Cisco WebUI, a known IP Address, Username and Password need to be assigned. Ensure a PC is connected to the DuraNET 3300 via the USB or RS232 Console and powered on.

  • Page 49: Updating Cisco Ios-Xe Version

    User Manual – DuraNET 3300 Operational Description Execute the following CLI command to reboot DuraNET 3300 switch# reload Confirm reload and system reboots. After reboot enter the following CLI commands to confirm IP Address, Username and Password in the terminal window listing.

  • Page 50: Figure 4.1: Show Configuration Listing

    User Manual – DuraNET 3300 Operational Description Console (Linux): To confirm and verify the Cisco IOS version enter the following CLI commands switch> enable switch# sho configuration “Version 17.1”. The configuration option may show This is representative only as your system may have a different Cisco IOS.

  • Page 51: Install Tftp Server (Linux)

    User Manual – DuraNET 3300 Operational Description Install TFTP Server (Linux) In order to update or change the IOS of the DuraNET 3300, PC1 needs to have a TFTP server. Reference documents: “Access Router Software Upgrade Procedure”, Doc ID 49044, July 31, 2015 “Installing and Configuring TFTP Server on Ubuntu”...

  • Page 52: Figure 4.5: Tftpd-Hpa Package Installed

    User Manual – DuraNET 3300 Operational Description tftpd-hpa package should be installed (Figure 4.5:.5). Figure 4.5: tftpd-hpa package installed... Now, check whether the tftpd-hpa service is running (Figure 4.6). ~$ sudo systemctl status tftpd-hpa Figure 4.6: Check whether the tftpd-hpa service is running.

  • Page 53: Figure 4.7: Tftpd-Hpa Is Running

    User Manual – DuraNET 3300 Operational Description Figure 4.7: tftpd-hpa is running. The default configuration file of tftpd-hpa server is /etc/default/tftpd-hpa. If you want to configure the TFTP server, then you have to modify this configuration file and restart the tftpd-hpa service.

  • Page 54: Figure 4.9: Configuration File Editing

    User Manual – DuraNET 3300 Operational Description Figure 4.9: Configuration file editing. Now, we only want to change the TFTP_DIRECTORY to /tftp and add the –create option to the TFTP_OPTIONS. Without the –create option, you won’t be able to create or upload new files to the TFTP server.

  • Page 55: Figure 4.11: Create A New Directory

    User Manual – DuraNET 3300 Operational Description Now, we need to create a new directory /tftp. See Figure 4.11. ~$ sudo mkdir /tftp Figure 4.11: Create a new directory. Now, change the owner and group of the /tftp directory to tftp. See Figure 4.12 ~$ sudo chown tftp:tftp /tftp Figure 4.12: Change the owner and group.

  • Page 56: Loading A New Image

    User Manual – DuraNET 3300 Operational Description Figure 4.15: tftpd-hpa is running. Loading a new Image Select a Cisco IOS Software Image ess3x00-universalk9.17.01.01.SPA.bin Download the Cisco IOS Software Image to the TFTP Server Download the Cisco IOS software image onto your workstation or PC from the Download Software Area (Registered Customers Only).
  • Page 57 User Manual – DuraNET 3300 Operational Description The exclamation point "!" indicates that the copy process is in progress. When complete, confirm with the following CLI commands switch#cd flash: switch# dir “You should see the new file in the flash: directory switch# config t switch(config)#boot system flash:ess3x00-universalk9.17.01.01.SPA.bin...

  • Page 58: Poe Type1 And Poe+ Type2 Functionality And Power Check

    User Manual – DuraNET 3300 Operational Description PoE Type1 and PoE+ Type2 Functionality and Power Check ed on any BaseT per port, not to Power over Ethernet (PoE/PoE+) support port, up to 30.0W exceed 130W total PoE power at 65°C. See Figure 4.16 below. This supports power and .

  • Page 59: Figure 4.17: Minicom Ip Address

    User Manual – DuraNET 3300 Operational Description Figure 4.17: minicom IP address The Username and Password can be found from the minicom window. switch>enable • • switch#sho running-config bri From PC1, open a web browser such as Firefox. Enter the DUT IP address in the URL window to bring up a Cisco GUI login:...

  • Page 60: Figure 4.18: Dut Login Window

    User Manual – DuraNET 3300 Operational Description Figure 4.18: DUT Login Window. From the GUI, navigate to Administration -> Power Management -> Total Power Supported Block Watts …enter total power requirement in the Block of 125 Watts as shown below within the oval in figure 4.18, then click...

  • Page 61: Figure 4.20: Click Yes To Continue

    User Manual – DuraNET 3300 Operational Description Select Yes as shown in figure 4.20. Figure 4.20: Click Yes to continue. Navigate back to dashboard to confirm setting of 125-watts as shown in POE Power Consumption pie chart (red oval). Figure 4.21: PoE power consumption box.

  • Page 62: Zeroization Or Declassification

    On the DuraNET 3300, the Zeroize Discrete is used exclusively for triggering the Zeroization / Declassification process, which zeroes and erases the switch configuration files or the entire flash file system, depending on the option provided under "service declassify".

  • Page 63: Zeroization Trigger

    User Manual – DuraNET 3300 Operational Description This also erases the complete NVRAM file system, therefore, all configurations, including startup and running configurations will be deleted. running-config startup-config The perma-locked bootable image(s) in the flash file system will still be available and can be used for booting the device.
  • Page 64 User Manual – DuraNET 3300 Operational Description switch> ping 192.0.2.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echoes to 192.0.2.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms 3. Copy the image via tftp switch>...

  • Page 65: Chapter 5 Specifications

    User Manual – DuraNET 3300 Specifications Chapter 5 Specifications Mechanical & Technical Specifications Dimensions Figure 5.1, Front Panel Dimensions provide the physical dimensions of the DuraNET 3300. Figure 5.1: Front Panel Dimensions Physical • Weight: 5.6 lb. (2.54 kg) for NET-3300-02H Dimensions (D x W x H), excluding connectors and mounting feet, 6.75”...

  • Page 66: Installation & Mounting

    Choosing a Mounting Location – Thermal Considerations The DuraNET 3300 enclosure is highly efficient at removing heat from the inside of the unit to the outside of the finned enclosure. It is best to mount the unit on a thermally cool, thermally conductive surface to keep the overall temperature as low as possible.

  • Page 67: Horizontal Mounting

    User Manual – DuraNET 3300 Specifications Horizontal Mounting To install the DuraNET 3300 on its side (horizontal): 3. Create a hole pattern on the mounting surface that matches the pattern shown in Figure 5.3. The mounting holes are 0.33” in diameter.

  • Page 68: Grounding

    User Manual – DuraNET 3300 Specifications Grounding • The bottom of the baseplate is conductive to allow the system grounding via the baseplate. • A blind grounding hole for attachment of a grounding cable using a #1/4-20 screw is provided on the rear of each module of the system.

  • Page 69: Power

    User Manual – DuraNET 3300 Specifications Power • 28 VDC nominal power; input range: 9 to 36 VDC • Power consumption: <50 watts max(est), excluding PoE consumption <180W at operating temp up to 65 C° with max PoE injection •...

  • Page 70: Operating Conditions

    User Manual – DuraNET 3300 Specifications MIL-STD-461F, CS114, bulk cable injection, 10k to 200 MHz; Curve 3, Figure 1 MIL-STD-461F, CS115, bulk cable injection, impulse excitation; impulse, Figure 1 MIL-STD-461F, CS116, damped sinusoidal transients, cables/power leads, 10k-100 MHz; transient, Figures 1-2 RTCA/DO-160G Sec.
  • Page 71 User Manual – DuraNET 3300 Specifications • Network Essentials IOS-XE Image Features: Layer 2 switching: IEEE 802.1, 802.3 standard, NTP, UDLD, CDP, LLDP, unicast MAC filter, VTPv2, VTPv3, EtherChannel, voice VLAN, PVST+, MSTP, and RSTP Layer 3 Routing Static IP routing (for dynamic routing, see Network Advantage option)
  • Page 72 User Manual – DuraNET 3300 Specifications ▪ Intermediate System to Intermediate System (IS-IS), v4 and v6 ▪ Inter-VLAN Routing Enhanced security: ▪ Layer 2 MACsec AES-256-bit crypto cypher support Virtualization: Vrf-lite IP Multicast: ▪ Protocol Independent Multicast (PIM)-PIM-SM, PIM-DM •...
  • Page 73 User Manual – DuraNET 3300 Specifications CISCOFLASH-MIB CISCO-FTP-CLIENT-MIB CISCOIF-EXTENSION-MIB CISCO-IGMP-FILTER-MIB CISCO-IMAGE-MIB CISCO-IP-STAT-MIB CISCOLAG-MIB CISCO-LICENSE-MGMT-MIB CISCO-MACAUTH-BYPASS-MIB CISCO-MAC-NOTIFICATION-MIB CISCO-MEMORY-POOL-MIB CISCO-PAE-MIB CISCOPING-MIB CISCO-PORT-QOS-MIB CISCO-PORTSECURITY-MIB CISCO-PORT-STORM-CONTROL-MIB CISCO-PRIVATE-VLAN-MIB CISCO-PROCESSMIB CISCO-PRODUCTS-MIB CISCO-ENTITYALARM-MIB CISCO-SNMP-TARGET-EXT-MIB CISCO-STP-EXTENSIONS-MIB CISCO-SYSLOGMIB CISCO-UDLDP-MIB CISCO-VLAN-IFTABLERELATIONSHIP-MIB CISCO-VLAN-MEMBERSHIPMIB CISCO-VTP-MIB ENTITY-MIB ETHERLIKE-MIB HC-RMON-MIB IEEE8021-PAE-MIB IEEE8023-LAG-MIB IF-MIB LLDP-EXT-MED-MIB...

  • Page 74: Other Specifications

    User Manual – DuraNET 3300 Specifications Other Specifications Reliability • Designed and manufactured using AS9100 aerospace grade / ISO 9001:2000 certified quality program • No moving parts. No fan or cold plate required • Conformal coated PCBs for humidity/tin-whisker mitigation •...

  • Page 75: Chapter 6 Troubleshooting

    User Manual – DuraNET 3300 Troubleshooting Chapter 6 Troubleshooting Product Identification The product is labeled with the Parvus P/N and serial number. Please refer to this information when communicating with Technical Support. Technical Assistance If you have a technical question or if you cannot isolate a problem with your product, please call or e-mail...

  • Page 76: Chapter 7 Contact Info

    User Manual – DuraNET 3300 Contact Info Chapter 7 Contact Info Company contact info: Curtiss-Wright Defense Solutions Division 3222 S. Washington St. Salt Lake City, Utah, USA 84115 T: +1.801.483.1533 F: +1.801.483.1523 www.curtisswrightds.com Sales: T: +1.800.483.3152 or +1.801.483.1533 slp_sales@curtisswright.com Product Technical Support: T: +1.801.433.6322...

  • Page 77: Firefox Browser Issue And Correction

    User Manual – DuraNET 3300 Appendix A Appendix A Firefox Browser Issue and Correction Occasionally, when attempting to access the Cisco WebUI from a Firefox browser you may encounter the following access failure. To correct this: From the Firefox home page click on the symbol ≡ located in the upper right corner.

  • Page 78: Minicom Client Install And Setup - Ubuntu

    User Manual – DuraNET 3300 Appendix A Minicom Client Install and Setup - Ubuntu Ensure you have an internet connection Linux prompt: ~$ To install minicom ~$ sudo apt-get install minicom To execute minicom ~$ sudo minicom –s The –s allows for minicom setup of which the following should be confirmed...

  • Page 79: Iperf Install And Setup - Linux Ubuntu

    User Manual – DuraNET 3300 Appendix A iperf Install and Setup – Linux Ubuntu Linux prompt: ~$ To install iperf ~$ sudo apt-get update ~$ sudo apt-get install iperf Executing iperf On the Server Machine (PC) o ~$ iperf –s –i5 On the Client machine (PC) o ~$ iperf –c 192.168.1.140 –i5 –t60...

  • Page 80: Automated Diagnostic Software Install And Execute

    User Manual – DuraNET 3300 Appendix A Automated Diagnostic Software Install and Execute Linux prompt: ~$ Install the GNU Compiler Collection (gcc) onto both PCs ~$ sudo apt install gcc Place the two test files in the following directory on the two Linux PCs Linux1: IP address 192.168.1.140...
  • Page 81 User Manual – DuraNET 3300 Appendix A MNL-0676-01 Rev A4 ECO- N/A Effective: 26 Feb 21 Page 81 of 84...

  • Page 82: Duranet 3300 Port To Cisco Name Mapping

    User Manual – DuraNET 3300 DuraNET 3300 Port to Cisco Name Mapping The Port name mappings of the DuraNET 3300 and internal Cisco hardware are listed below and can be display by executing the CLI commands • switch>enable • switch# sho int status...

  • Page 83: Glossary

    User Manual – DuraNET 3300 Glossary Glossary Term Definition/Description Cisco’s operating system for their enterprise network devices (switches, routers, etc.) IOS-XE 10GBASE-SR A 10 Gigabit optical Ethernet standard. Various fiber classes allow 300-400 meter max cable length MNL-0676-01 Rev A4...
  • Page 84 User Manual – DuraNET 3300 Glossary {Parvus back cover, 8.5 x 11 picture inserted in front of text. DO NOT DELETE THE COMMENTS OR THIS PAGE. These comments are only visible in Normal view. The picture hides the header and these comments when you print the manual or view it in Print Layout or Print Preview.}...

Table of Contents

Save PDF