Installing The Gliding Rack; Removing The Gliding Rack - Samsung NV70 33 Series User & Installation Manual

Step 2
Check the four points expressed in the below picture.
Push the "Linker" until the "Linker" and "Gliding rail" are tightly coupled and check if four points
are assembled completely.
Front

INSTALLING THE GLIDING RACK

REMOVING THE GLIDING RACK

Neo Lite_NV70H3340RS_EO_DG68-00591E-00_EN.indd 15
Linker
Carefully insert gliding rack in the oven to install until
the gliding rack reaches the back.
The gliding rack has 2 glide rails that allow you to
extend the rack well out of the oven without touching
the sides of the oven walls.
Please grasp both "Base rack" and " Linker" and pull
them to remove the gliding rack.
English - 15
When using the gliding rack in the oven, be sure
to pull on the "Linker" only to slide it in and out.
If you grasp the "Base rack", the entire gliding
rack will be removed.
WARNING
Be very carefully removing gliding rack out of the
oven. Hot meals, accessories and surfaces can
burn you.
2014-06-09 4:56:04