Table of Contents
Advertisement
2. There are the histories from number 1 to number 3.
3. The latest Error is memorized on history number 1,and then the
old histories are shifted to the history number 2, 3.
4. Put out data from the memory number 3 by the shift is deleted.
5. If the latest Error is same with the history number 1 (2nd-latest), it
is not memorized.
(The same Error number is not memorized in succession)
8.2.4.2. (VHS) Condition for clearing the self-diagnosis history
1. A case of that press the FF key and the EJECT key
simultaneously over 5 seconds.
8.2.4.3. (VHS) Indication of the self-diagnosis history.
1. The self-diagnosis histories and its supplementary data could be
indicated on the FIP with Service mode of number from 3 to 5.
2. The procedure of setting the service mode and the format if the
indication are same as usual.
Both the Error numbers and its supplementary data of history 1, 2and 3 are indicated by
selecting the Service mode 3, 4 and 5 as shown above.
In case of that any Error has not been memorized, the Error number and its supplementary data
is indicated as " - ".
8.2.4.4. (VHS) Display of Supplementary Data 3 and 4
During displaying the Self-Diagnosis History, press [STOP] key on front panel to change the
display.
*Example of Display
A: Service Mode Number.
B: Supplementary Data 3...Mechanism process shifting Number.
C: Supplementary Data 4...LM(Loading Motor information)
45
Advertisement
Table of Contents
