Table of Contents
Advertisement
Mode name
SD card WRITE
Delete Error History information
check
stored on the unit.
Tray OPEN/
The RAM drive tray is opened
CLOSE Test
and closed repeatedly.
Error code
Initialization of the last error
initialization
code held by timer (Write in F00)
Initialize Service
Last Drive Error, Error history
and Error Codes stored on the
unit are initialized to factory
setting.
Finishing service
Release Service Mode.
mode
8.2. (VHS) Self-Diagnosis and Special Mode Setting
8.2.1. (VHS) Self-Diagnosis Functions
This model has a self-diagnosis and display function. If the VHS section detects trouble during
installation or during use, one of the following Error Codes will automatically appear in the
display on VHS side. Error Codes are displayed in the form of a single English letter followed by
two numbers, as for example "H01".
Note:
Item
Description
FL display
When the WRITE check is
OK.
When the WRITE check is
NG.
*Note:
The image stored in the
SD card will be erased.
"*" is number of open/
close cycle times.
Display in STOP (E-E)
mode.
39
Key operation
(Remote controller
Insert a SD card
card slot, and press
in service mode.
*Insert SD card
power is off.
*Check for [CARD
display on the FL
and go on the procedure.
Press [9] [1] in service
mode
*When releasing
mode, press the
button of Remote
Controller more
seconds.
Press [9] [8] in service
mode.
Press [9] [9] in service
mode.
Press power button
the front panel or
controller in service
Advertisement
Table of Contents
