Table of Contents
Advertisement
Mode name
Magenta Picture
Magenta picture is output with
Output
Component Output from AV
Decoder.
*Magenta picture
(Saturation rate: 100%)
*It is enable to switch Interlace/
Progressive by "I/P switch: [1]
[4]"
RTSC Return in
L1 input signal is encoded (XP),
XP
decoded (XP) and output
decoded signal to external
(A & V)
without DISC recording and DISC
playback.
I/P Switch
Switch Interlace and Progressive
in EE mode.
*Initial setting is "Interlace".
*This command is effective
during executing "White Picture
Output", "Magenta Picture
Output" and "RTSC Return in XP
(A & V)" modes.
Audio Mute
Check whether mute is applied
(XTMUTE)
normally by the timer
microprocessor.
Audio Mute
Check whether mute is applied
(XDMUTE)
normally by the Digital P.C.B..
Item
Description
FL display
*Initial mode is "Interlace". Press [1] [2] in service
Switch Interlace/
Progressive
Initial mode: EE2/ Interlace
/ XP/ Audio 48kHz
Switch Interlace/
Progressive
Audio 44.1 kHz/ 48 kHz
Switch
Initial mode is Interlace
Switch Interlace/
Progressive
34
Key operation
(Remote controller
mode.
Press [1] [4] in Magenta
Picture Output mode.
*I/P are switched
alternately.
Press [1] [3] in service
mode.
Press [1] [4] in RTSC
Return XP mode.
*I/P are switched
alternately.
Press [2] [4] in RTSC
Return XP mode.
*48 kHz / 44.1 kHz
switched alternately.
Press [1] [4] in I/
mode.
*I/P are switched
alternately.
Press [2] [1] in service
mode.
Press [2] [2] in service
mode.
Advertisement
Table of Contents
