Specifications
19.1.10. mV Sensor input (NOT MFT1711 or MFT1721)
Specfication
Including temperature
(third party module)
Range
Resolution
19.1.11. Internal memory (Not MFT1711 or MFT1721)
Specfication
Capacity
Bluetooth
communication
®
19.1.12. Power consumption:
Specfication
Nominal minimum:
Nominal maximum:
Range:
19.1.13. Temperature (via 3rd Party Module)
Specfication
Intrinsic accuracy:
Resolution:
Range:
19.2
Environmental Specification.
Specfication
Temperature
Operational range:
Storage range:
Humidity
Altitude
Weight:
Dimensions:
IP rating:
Power Supply.
Battery:
Safety / EMC.
Locations:
Safety in accordance with BS EN 61010 -1 2010 + 61010 -30:2010
Installation Category: 600 V CAT III / 300 V CAT IV. (Max Phase to Phase 550 V)
In addition switch probe and test leads are designed to meet IEC 1010-031:2008, Double insulated to
Installation Category III, 300 V phase to earth, 500 V phase to phase.
66
MFT1800 series
Detail
±1.0% ±2 digits
0.0 mV to ±199.9 mV dc
0.1 mV
Detail
1000 results
Detail
60 mA (Voltage range with no input voltage)
350 mA (Active Insulation test set to 1000 V / 1 MΩ)
-20 °C to +55 °C
Detail
±1.0% ±2 digits
1 °C
-20 °C to +100 °C
Detail
-10 °C to +55 °C
-25 °C to +70 °C
90% R.H. at +40 °C max.
2000 m to full safety specification.
1000 g ±10% including batteries but excluding test leads, accessories and
carry case.
150 mm high x 85 mm wide x 235 mm deep (6 in. x 3.5 in. x 9.5 in.)
IP54
Battery: Primary 6 x 1,5 V cells IEC LR6 type (AA alkaline,).
Rechargeable: 6 x 1.2 VNiMH cells EC HR6. Display shows rechargeable
[NiMH] when the battery type is changed in setup option (Section 10).
EMC In accordance with IEC61326 edition 2.
Class B locations.
www.megger.com