Megger MFT70 Quick Start Manual

MFT70
Quick Start Guide
MEASURING VOLTAGE
1
TEST THE PAIR FOR ALTERNATING CURRENT AND DIRECT CURRENT VOLTAGE
TIP to RING
MEASURING CONTINUITY
1
&press Dm
button
MEASURING INSULATION RESISTANCE
1
Test button
Mode
Lead Null
Test lock Display
Setup selector backlight
Results store
..
�
l
�
RING to GROUND
2
Ring
Tip
Primary
functions
TRUE RMS
3 Press either
When connecting to a live circuit,
Lh
the voltage and frequency of
supply is automatically displayed.
TIP to GROUND
3 Press and hold
. . .
To lock the test, hold down either TEST button, followed
by either of the
There's a S00VDC MAX Insulation Resistance Voltage Testing
as per Telecom Standards! The field pair must be OPEN at
end of loop to properly conduct an insulation resistance test.
Secondary Test button
functions Lead Null
Touch voltage
Test lock
contact point
Setup selector
click the mode
button to togggle
the continuity
buzzer ON/OFF
Megger
5 Commonwealth Ave
Woburn, MA 01801
Phone 781-665-1400 Toll
Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
lim
button
For all 3 setup configurations:
V < 10 = Proceed to the next test
Ac
V 10 = Fault must be cleared
"?.
Ac
V < 3 = Proceed to the next test
Dc
V 3 = Fault must be cleared
"?.
Dc
•jfjl
button
RED lock buttons below.
To store your test results:
1. Press lock & release
2. Using the right test/lock buttons,
scrol I unti I the test you need is
reached.
3. Press lock & release again to dis-
play the remaining options & use
the right buttons (above) to scroll
again.
4. Press lock & hold until 'Str Ok' is
displayed.
..