Megger MFT1800 Series User Manual page 59

Appendix A – Sending, Storing, Deleting and Recalling Test Results (MFT1835 and MFT1845+)
Loop testing (L-L/L-N)
1. Perform a Loop L-L/L-N test as described previously.
2. Press and hold the Bluetooth
3. Use the Right Lock / RIGHT TEST buttons to scroll through the options until the one you need is reached (L-N or
L-L).
4. Press the Bluetooth
alternate whilst the connection is being established. When connected, the Bluetooth® symbol will flash whilst
the result is transmitted.
5. The test results will now appear in the correct box in the certificate open on your PC or mobile device.
RCD testing
1. Perform a RCD test as described previously.
2. Press and hold the Bluetooth
test result will flash whilst the result is transmitted.
3. The test results will now appear in the correct box in the certificate open on your PC or mobile device.
For Auto RCD tests all results are automatically transmitted to the correct boxes on the certificate (the appropriate
value must be selected on the PC or mobile device for each box when prompted).
Earth testing
1. Perform an earth test as described previously
2. Press and hold the Bluetooth
test result will flash whilst the result is transmitted.
3. The test results will now appear in the correct box in the certificate open on your PC or mobile device.
www.megger.com
(Lock) button to display the first option. Release button when L-N displayed.
®
(Lock) button to send the test result to your PC or mobile device. The display chevrons will
®
(Lock) button again to send the test result to your PC or mobile device. The MFT
®
® (Lock) button again to send the test result to your PC or mobile device. The MFT
Continued...
MFT1800 series 59