Page 1
OPERATING INSTRUCTIONS SAFE LOCK CAWI PRIMOR 1000/3000 Electronic door lock for WA safes Issue 08.2020...
Page 2
Thank you very much ❤ We would like to thank you for choosing Waldis when it comes to safety. When buying a safe, you have chosen a product tested according to EN1143-1. A Swiss quality product with VdS - tested security.
Safe lock 1.1. General notes The lock works with a 6-digit numerical code. Each keystroke is confirmed with a signal consisting of a tone and a flashing sign. After entering a valid code, a double signal follows. After an invalid entry, a long beep.
1.1.4. Manipulation lock After 4 invalid code entries, the keypad is blocked for approx. 5 minutes. During this locking period, a flashing signal is audible every 10 seconds. If 2 incorrect codes are entered again after the blocking time has elapsed, the blocking time of 5 minutes starts again.
Power supply 2.1. General If the battery voltage is insufficient, a warning tone is emitted several times in succession after the code is entered and the red LED flashes alternately several times. Change the battery. The programmed codes are retained during the battery change.
Password 3.1. General basic rules 3.1.1. Avoid obvious passwords • No trivial values like 000000, 0815, 123456 • Do not use your own birthday, car license plate, phone number or name (your own, wife/husband, children, pets, company, place of residence, etc.) as password.