Gear Motor - Philips PICO BARISTO AMF Service Manual

PICO BARISTO

7. 8. Gear motor

E
B
D
B
Loosen the screws as illustrated, remove the pin boiler and the
gear motor cover.
The following are located inside the compartment protected by
the casing:
- Electric motor (A) with gears (B) and (C) for transmission and
timing of the dispenser.
- Brewing unit present microswitch (E).
A
- Microswitch (D) detecting brewing unit home and work posi-
tions.
- Remove the gear (C) that meshes with the motor transmission
shaft.
- Remove the large gear (B).
C
- R emove the motor (A), complete with transmission shaft.
Replace the gear (B), making sure that the imprint of the arrow
is aligned with the opening containing the pin (P).
P
H
When replacing the motor and the transmission shaft, make
sure the guide runners (L) are in the right position.
Grease the shaft thoroughly and evenly.
L
07 DISASSEMBLY
4/6