Coffee Grinder; Grinder Blades; Coffee Grinder Adjustment - Philips PICO BARISTO AMF Service Manual

PICO BARISTO

7.2. Coffee grinder

7.3. Grinder blades

A
B

7.4. Coffee grinder adjustment

Adjustment by a service center
C
Unscrew the screws hi-
ghlighted, lift the grin-
der and remove the
electrical connections
To extract the top sup-
port of the appliance,
press on the grinding
adjustment spindle (A)
and turn the support
anticlockwise until it
unhooks.
Turn the grinder blades
clockwise out of the
support. The bayonet
connections can be ac-
cessed from the rear.
A
B
The grinding adjustment can be set by the user
(only with the coffee grinder in operation) by
pressing and turning (only by one click at a time)
the insert inside the coffee bean hopper with the
aid of the wrench supplied.
To adjust grinding further, the engineer can
work directly on the coffee grinder by pressing
and turning the ring nut (C) shown. (clockwise
+ to increase the particle size of the coffee and
anticlockwise - to decrease it). If there are any
remains of coffee powder between the two
grinding blades it is recommended to tighten by
max. two marks at a time.
Lastly, move the arrow (A) on the adjustment
knob to the center of the adjustment dots on the
cover (B).
07 DISASSEMBLY
When reassembling
the coffee grinder,
make sure the spring
is repositioned cor-
rectly (see photo)
Turn the grinder
blades anticlockwise
out of the support.
For a standard adjust-
ment, both markings
must be aligned.
2/6