Philips PICO BARISTO AMF Service Manual page 21

PICO BARISTO
The AquaClean filter cannot be
activated as the tick does not
appear on the display.
The filter cannot be activated
and the machine asks for
descaling.
The AquaClean filter is installed,
but the descaling message
appears.
The descaling message appears
before 8 filters were replaced.
The type of milk used is not
suitable for frothing. (Only
AMF)
A filter has just been activated. You have to dispense at least
You have already replaced 8
AquaClean filters. After 8 filter
replacements you
descale the machine.
The filter has not been replaced
in time after the AquaClean
water filter signal started
flashing.
The filter has not been installed
during first installation but
after having brewed approx.
50 coffees (based on 100ml
cups). The machine has to
be completely limescale-free
before installing the AquaClean
filter.
The AquaClean filter was not
activated in the menu at first
installation.
After 8 filter replacements, you
need to descale the machine
You did not activate
AquaClean filter
during first installation.
You placed the AquaClean filter
after having used the machine
for a while.
You did not activate
replacement filter
machine menu.
03 BRIEF INSTRUCTIONS
Different types of milk result in
different amounts of froth and
different froth qualities. Semi-
skimmed or full-fat cow's milk
give good results.
10 cups (of 100ml each before
you can activate a new filter.
Be careful as you activate a
new filter, the filter counter will
increase automatically.
Descale your machine first and
install the filter.
need to
Descale your machine first and
install the filter.
First descale the machine and
then install a new AquaClean
filter. After descaling, the filter
counter is reset to 0/8. Always
confirm filter activation in the
machine menu, also after filter
replacement
Descale your machine first and
install a new filter.
First descale the machine and
then install a new AquaClean
filter. This will reset the
filter counter to 0/8. Always
confirm filter activation in the
machine menu, also after filter
replacement.
the First descale the machine and
correctly then install a new AquaClean
filter. Always activate the filter
in the machine menu.
the
in the
5/6