Tv Tuner Settings - Maxent MX-50X1 User Manual

TV Tuner Settings

Accessing the TV Settings Menu
If your display is equipped with the optional TV tuner module, available TV tuner settings can be displayed
by:
1. Press the MENU +/- keys on the remote or the front control panel.
2. Use the ADJ +/- keys to navigate to "TV" OSD sub-menu as displayed below.
3. Use the MENU +/- keys to select the option you would like to set. A description of each option is
described in this section.
4. Use the ADJ +/- keys to change actual settings.
ADVANCED FUNCTIONS
MTS
Sets stereo reception settings for the TV tuner. This function is
also accessible using the remote control's MTS key. Pressing the
MTS key will cycle the tuner through all three settings.
STEREO
Set status to STEREO to receive stereo reception from TV
broadcasts when available. Not all TV broadcasts are
transmitted with stereo sound capability.
MONO
Set status to MONO to set audio to mono mode.
SAP
Set status to SAP (Second Audio Program) to receive audio
simulcasts in other languages. Not all TV broadcasts are
transmitted with second audio program.
CCD
Sets Closed Captioning function. It will scroll through the following
settings.
Note: Only CC1 mode is enabled for U.S. models.
CHANNEL SEARCH
Channel search will automatically search for TV channels with a
broadcast signal. Channel search will skip over channels that do
not have a reception so you don't have to watch them as you
change through channels. By default, channel search will always
be set to DISABLE. To engage channel search, simply set to
ENABLE.
TUNER SOURCE
The TV tuner is compatible with Cable TV or standard reception
using an antenna. If you are using Cable TV, set the TUNER
SOURCE setting to CABLE. If you are using an antenna, set the
setting to AIR.
BACKGROUND / BACKGROUND COLOR
Background setting eliminates the "snowflake" effect that results
when a TV channel is not available by displaying a colored
background. The BACKGROUND COLOR setting allows you to
choose the color preference.
23