Maxent MX-50X1 User Manual page 32

Accessing the Advanced Calibration Menu
The advanced calibration menu is where you can access the various video setting for
each input using the remote control.
1. Press and hold the
5 seconds and release.
2. Press and hold the
5 seconds and release.
3. Press the key and the "Advanced Setting"
menu shown below will display.
Selecting Video Input to Calibrate
The next step is to select the specific video input that you would like to calibrate. There
are up to 7 video input selection options displayed including TV tuner. Please note that if
the TV tuner option is not installed, you will not be able to access the TV tuner input for
calibration.
1. Use the
the video input you would like to calibrate.
2. Once you have highlighted the video input, press
the or (left or right arrow menu key) to
confirm the selection. The plasma display will now
switch its input and display the calibration menu
shown on the right.
3. If you make a mistake, simply highlight SAVE AND
BACK using the
back to previous menu.
(left arrow menu) button for
(right arrow menu) button for
(up/down menu keys) to highlight
or and press the
ADVANCED CALIBRATION
to go
31