Connecting Tv Or Catv; Connecting A Vcr - Maxent MX-26X3 Owner's Manual

Display Connections

Connecting TV or CATV

Connecting to TV or Cable TV
Connect the RF cable from the antenna or cable
socket to the RF connector labeled as TV on
the back of the monitor.

Connecting a VCR

Using S-Video Input
Connect the S-Video (4-pin DIN) connector from
the VCR to the S-Video input on the back of
monitor.
Connect the red (R) and white (L) audio jacks
from the VCR to the (R) and (L) audio-in jacks
located next to the S-Video connector.
Note:
There are two sets of S-Video inputs
provided.
Using Composite Input
Connect the yellow (video) out connector from
the VCR to the yellow video input on the back of
monitor.
Connect the red (R) and white (L) audio-out
jacks from the VCR to the R and L audio-in
jacks located next to the yellow Video
connector.
Note:
There are two sets of composite inputs
provided.
14