ANTAIRA LMP-0804G-SFP Series Quick Installation Manual

Antaira Technologies
LMP-0804G-SFP Series
8-Port Industrial Gigabit PoE+ Managed Ethernet Switch,
w/4*10/100/1000Tx Ports + 4*100/1000 SFP Slots
Quick Installation Guide
Version 1.1
(January 2021)
Tel: 1-844-268-2472
Fax: 1-714-671-9944
www.antaira.com
Package Check List
The package contains the following items:
⚫ 1 – Quick installation guide
⚫ 1 – LMP-0804G-SFP(-T)
⚫ 1 – Wall mounting bracket set with screws
⚫ 1 – DC cable –18 AWG & DC jack 5.5 x 2.1mm
⚫ 1 – RJ45 to DB9 Serial Console cable
⚫ 1 – Dust cover set
Front Panel Layout
Grounding Screw
SFP# 5~8 – 100/1000 SFP
LAN# 1~4 – LED for Link/Activity
Status 10/100/1000Mbps
LAN# 1~4 – LED for PoE Status
Top Panel View
LMP-0804G-SFP series top panel is equipped with one 6-pin
removal terminal block connector for dual DC power inputs
(48~55VDC).
6-Pin Removal Terminal Block (Power Input)
Product Overview
System Interface/Performance

All RJ45 ports support the auto MDI function

Embedded 4*10/100/1000Tx (PSE: 30W/Port) RJ45 ports
and 4*100/1000 SFP Slots

Store-and-forward switching architecture

8K MAC address table

Power line EFT protection: 2,000VDC; Ethernet ESD
Protection: 6,000VDC
19020000000050
Power Input & Connection

DC 48 to 55V redundant power with a 6-pin removal terminal
block

It is recommended to use a UL listed industrial power supply
Operating Temperature

Standard operating temperature model: -10°C to 70°C

Extended operating temperature model: -40°C to 75°C
Case/Installation

IP30 protection

DIN-Rail and wall mount design
6-Pin Removal Terminal Block (Power Input)
LED Indicators
LED for Power 1, Power 2, Fault, Master, LED
and Ring
Console Port
Power 1
USB Backup
Reset Button
Power 2
SFP# 5~8 – LED for Link/Activity
Status 100/1000 SFP Slots
Fault
LAN# 1~4 – 10/100/1000Tx RJ45
Master
Ring
LAN Port 1~4
(Upper LED)
Grounding Screw
LAN Port 1~4
(Lower LED)
PoE Indicators
SFP Port 5~8
LINK/ACT
Quick Installation
Ethernet Ports
RJ45 Ports (Auto MDI)
All RJ45 ports are auto-sensing for 10Base-T, 100Base-TX, or
1000Base-T device connections. Please follow the wiring pin
assignment table below for Ethernet port installation.
Color Description
On Power input 1 is active
Green
Off Power input 1 is inactive
On Power input 2 is active
Green
Off Power input 2 is inactive
Green Preconfigured alarms are not detecting failure
Green/Red Red Preconfigured alarms are detecting failure
Off Switch is in the process of booting
On ERPS Owner Mode (Ring Master) is ready
Green
Off ERPS Owner Mode (Ring Master) is not active
On Ring Network is active
Green
Off Ring Network is not active
On Connected to network, 10/100/1000Mbps
Flashing Networking is active
Green
Off Not connected to network
On The port is supplying power to the powered-device
Off No powered-device attached or power supplying fails
Green
On Connected to network
Green:1000Mbps
/ Flashing Networking is active
Amber:100Mbps
Off Not connected to network