ANTAIRA LMP-0800G-24 User Manual
  1. Manuals
  2. Brands
  3. ANTAIRA Manuals
  4. Switch
  5. LMP-0800G-24
  6. User manual

ANTAIRA LMP-0800G-24 User Manual

8-port industrial poe+ gigabit managed ethernet switches
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Antaira Technologies - Industrial Ethernet Switches
LMP-0800G-24 Series User Manual V1.0
LMP-0800G-24 Series
8-Port Industrial PoE+ Gigabit Managed Ethernet Switches
8*10/100/1000Tx (30W/Port); 12~36VDC Power Input (w/ Voltage Booster)
Version 1.0

User Manual

i

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LMP-0800G-24 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ANTAIRA LMP-0800G-24

Summary of Contents for ANTAIRA LMP-0800G-24

  • Page 1: User Manual

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 LMP-0800G-24 Series 8-Port Industrial PoE+ Gigabit Managed Ethernet Switches 8*10/100/1000Tx (30W/Port); 12~36VDC Power Input (w/ Voltage Booster) Version 1.0 User Manual...

  • Page 2: Trademark Information

    Trademark Information Antaira is a registered trademark of Antaira Technologies, LLC, Microsoft Windows and the Windows logo are the trademarks of Microsoft Corp. NetWare is the registered trademark of Novell Inc. WMM and WPA are the registered trademarks of Wi-Fi Alliance.

  • Page 3: Fcc Warning

    Industrial Grade Gigabit PoE Managed Ethernet Switches User Manual Version 1.0 (December 2015) This manual supports the following models:  LMP-0800G-24  LMP-0800G-24-T This document is the current official release manual. Please check our website (www.antaira.com) for any updated manual or contact us by e-mail (support@antaira.com).

  • Page 4: Table Of Contents

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 Table of Contents 1. Introduction ..............1 1.1 Product Overview 1.2 Product Software Features 1.3 Product Hardware Features 1.4 Package Contents 1.5 Safety Precaution 2. Hardware Description ..........4 2.1 Physical Dimensions...
  • Page 5 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.2.1 System Information ..........15 5.2.2 Admin & Password ..........16 5.2.3 IP Setting ..............16 5.2.4 IPv6 Neighbor Cache ..........17 5.2.5 IPv6 Settings ............18 5.2.6 System Time ............18 5.3 Port Management...
  • Page 6 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.6.4 MSTI Configuration ..........37 5.7 IGMP Snooping 5.7.1 IGMP Settings ............40 5.7.2 IGMP Snooping Status Table ......... 41 5.8 802.1Q VLAN 5.8.1 802.1Q VLAN Settings ........... 42 5.9 QoS (Traffic Prioritization)
  • Page 7 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.14 802.1X 5.14.1 802.1X Settings ............ 57 5.14.2 Local Database ............ 58 5.14.3 RADIUS Server ............ 59 5.15 UPnP 5.15.1 UPnP ..............60 5.16 Modbus TCP 5.16.1 Enable Modbus TCP ..........61 5.16.2 MODBUS Data Map and Information ....
  • Page 8 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.20 Configuration 5.20.1 Save ..............74 5.20.2 Backup & Restore ..........74 5.20.3 Auto Load & Backup ..........75 5.21 Logout 6. Command Line Interface Management ....76 6.1 About CLI Management 7.

  • Page 9: Introduction

    SCADA systems or control networks. The LMP-0800G-24 series is IP30 rated and DIN-rail mountable. There are also two wide operating temperature models for either a standard temperature range (STD: -10°C to 70°C) or an extended temperature range (EOT: -40°C to 75°C).

  • Page 10: Product Hardware Features

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0  IEEE802.1q VLAN tagging, port-based VLAN support  IGMP snooping v1/v2, IGMP filtering / throttling, IGMP query up to 256 group  Supports IPv4/IPv6, RMON, MIB II, port mirroring, event syslog, DNS, NTP/SNTP, HTTPS, SSH/SSL, TFTP ...

  • Page 11: Package Contents

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 1.4 Package Contents  1– LMP-0800G-24 series: 8-port industrial gigabit PoE+ managed Ethernet switch, with 8*10/100/1000Tx (PSE 30W/Port)  1-Product CD  2-Wall mounting brackets and screws  1-RJ45 to DB9 Serial Console cable ...

  • Page 12: Hardware Description

    LMP-0800G-24 Series User Manual V1.0 2. Hardware Description 2.1 Physical Dimensions Figure 2.1, below, shows the physical dimensions of Antaira’s LMP-0800G-24 series: 8-port industrial gigabit PoE+ managed Ethernet switches with 8*10/100/1000Tx ports. (W x D x H) is 54mm x 99mm x 142mm Figure2.1...

  • Page 13: Front Panel

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 2.2 Front Panel The front panel of the LMP-0800G-24 series industrial gigabit PoE+ managed Ethernet switch is shown below in Figure 2.2. 6-Pin Removal Terminal Block (Power Input) Grounding Screw LED for PWR1, PWR2, and Fault LAN Port #5~8 –...

  • Page 14: Reset Button

    (Right LED) No powered-device attached or power supplying fails PoE Indicators Table 2.1 - LED Indicators for LMP-0800G-24 Series 2.5 Reset Button There is a ‘Reset’ button located on the front panel of the industrial Ethernet switch that helps users to reboot, restore default, or save running configurations by pressing the button for different seconds.

  • Page 15: Ethernet Ports

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 2.6 Ethernet Ports  RJ-45 Ports RJ-45 Ports (Auto MDI/MDIX): The RJ-45 ports are auto-sensing for 10Base-T, 100Base-TX, or 1000Base-T connections. Auto MDI means that the switch can connect to another switch or workstation without changing the straight-through or crossover cabling.

  • Page 16: Cabling

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 The following figures show the cabling schematics for straight-through and crossover. Figure 2.4 Figure 2.5 Straight-Through Cable Schematic Crossover Cable Schematic 2.7 Cabling Use the four twisted-pair, category 5e, or the above cabling for the RJ-45 port connections. The cable between the switch and the link partner (switch, hub, workstation, etc.) must be less than 100...

  • Page 17: Wiring The Fault Alarm Contact

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 2.9 Wiring the Fault Alarm Contact The fault alarm contact is in the middle of the terminal block connector as the picture shows below in Figure 2.8. By inserting the wires, it will detect the fault status including power failure or port link failure (managed industrial switch only) and forma normally open circuit.

  • Page 18: Mounting Installation

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 3. Mounting Installation 3.1 DIN-Rail Mounting The DIN-Rail is pre-installed on the industrial Ethernet switch from the factory. If the DIN-Rail is not on the industrial Ethernet switch, please see Figure 3.1 to learn how to install the DIN-Rail on...

  • Page 19: Wall Mounting

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 3.2 Wall Mounting Follow the steps below to mount the industrial Ethernet switch using the wall mounting bracket as shown below in Figure 3.4. 1. Remove the DIN-Rail bracket from the industrial Ethernet switch by loosening the screws.

  • Page 20: Hardware Installation

    LMP-0800G-24 Series User Manual V1.0 4. Hardware Installation 4.1 Installation Steps This section will explain how to install Antaira’s LMP-0800G-24 series: 8-port industrial gigabit PoE+ managed Ethernet switches with 8*10/100/1000Tx (PSE: 30W/Port) ports. Installation Steps 1. Unpack the industrial Ethernet switch from the original packing box.

  • Page 21: Web Management

    This section introduces the configuration by web browser. 5.1.1 About Web-Based Management All of Antaira’s industrial managed switches are embedded with HTML web console interfaces that have a flash memory on the CPU board. It is a “user-friendly” design with advanced management features that allow users to manage the switch from anywhere on the network through any Internet browser, such as Internet Explorer (version 9.0 or above is recommended),...
  • Page 22 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 3. The login screen appears. Key in the default username: admin and password admin. 5. Click “Login” button, then the main (status) page of the Web Console will appear as below Figure 5.2.

  • Page 23: Basic Setting

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.2 Basic Setting 5.2.1 System Information Below, Figure 5.3, shows the switch system setting information. Figure 5.3 – Switch Settings (Status) Page Terms Value Description Factory Default: Switch *Users can assign any name label to identify this managed System Name node.

  • Page 24: Admin & Password

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.2.2 Admin & Password Below, describes how to configure the system user name and password for the web console login. Figure 5.5 – Administrative Account Terms Value Description New Password...

  • Page 25: Ipv6 Neighbor Cache

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 Terms Value Description DHCP Client Enable the DHCP client by checking this box. If DHCP fails and the configured IP address is zero, DHCP will retry. If DHCP fails and the configured IP address is non-zero, DHCP will stop and the configured IP settings will be used.

  • Page 26: Ipv6 Settings

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.2.5 IPv6 Settings Figure 5.10 – IPv6 Settings Terms Value Description IPv6 Enable/Disable Check or uncheck the box to enable or disable IPv6 settings IPv6 Address The unit default IPv6 address is depended on MAC address.

  • Page 27: Port Management

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 Terms Value Description Users can define the switch’s local time, or click “Sync with Local Time browser” button to have local time setup automatically. Users can use dropdown box to setup the switch location time...

  • Page 28: Poe (Power-Over-Ethernet)

    Figure 5.16 – Port Configuration Description 5.4 PoE (Power-over-Ethernet) LMP-0800G-24 series is one of Antaira’s industrial PoE+ gigabit managed switches that has eight built-in IEEE802.3at complaint ports, and each PoE port can support PoE output power up to a maximum of 30W per port. It is also backward compatible with IEEE 802.af to support any standard PoE powered devices (PD).

  • Page 29: Ping Alarm

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 Terms Value Description Port No. PoE Port Number Any PoE port will automatically detect any PD (Powered Device) is Status connected and display the situation. Users can use the dropdown box to enable or disable any PoE port...

  • Page 30: Erps

    Antaira is proud to introduce and implement Ethernet Ring Protection Switching (ERPS) protocol as a standard ring solution for network redundancy with all new industrial managed Ethernet switches.

  • Page 31: Erps Status

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 Ethernet Ring Protection Switching (ERPS), defined in ITU-T G8032, implements a protection switching mechanism for Ethernet traffic in a ring topology. By performing the ERPS function, potential loops in a network can be avoided by blocking traffic to flow to the ring protection link (RPL) to protect the entire Ethernet ring.

  • Page 32: Erps Configuration

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 Terms Value Description Abnormal: After enabling ERPS, one of ERPS node link failed or link down. Ring State Normal: ERPS disable or after enabling ERPS, the ring is closed and working well.
  • Page 33 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 Terms Value Description “Enable” or “Disable” ERPS protocol Protocol ERPS ring port 0, it could be map to real switch port 1 – port 6. Ring Port 0 Do not set the same as Ring port 1.

  • Page 34: Before Configuring Erps

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.5.3 Before Configuring ERPS Before configuring ERPS, the rapid spanning tree protocol (RSTP), or multiple spanning tree protocol is required to disabled, due to only one protocol is exclusive running within a switch.
  • Page 35 ITU-T G.8032 defines three roles in ERPS, which are “RPL Owner Node”, “RPL Neighbor Node”, and “None Node”. Below are two scenarios describing how to configure the ERPS in Antaira’s industrial managed Ethernet switches. Users can reference it to configure the managed switch as RPL-configured...
  • Page 36 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.5.3.1 Scenario A – RPL Configured Architecture Under scenario A, there are three major roles required to configure within the ERPS configuration. Figure 5.27 – RPL-Configured Architecture Caution: Before enabling any ERPS protocols on any of the Ring Nodes, please DO NOT connect all switches to form a loop (ring) network yet.
  • Page 37 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 [RPL Owner Node] There is only one RPL Owner Node could be set in a ring network. In order to set up the RPL Owner Node, choose a switch and enable “Protocol” under the ERPS Configuration interface, and follow below steps and use Figure 5.28, below, as an example:...
  • Page 38 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 [RPL Neighbor Node] Users should choose a second managed switch that is adjacent to the first managed switch and set it up as the RPL neighbor node. For configuration, users should login to the second managed switch’s ERPS configuration interface and choose a specific port number under “Ring...
  • Page 39 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 [None Node] Then users should setup the rest of the managed switches’ “Role” of both “Ring Port 0 and 1” as “None Node” as shown above in Figure 5.27. Please be sure no duplicate port number has been chosen within a managed switch’s ERPS ring setting, the incorrect configurations may...
  • Page 40 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.5.3.2 Scenario B – Non-Configured Architecture In some situations, users can choose not to configure the RPL owner and neighbor node. The ERPS can still work well under the mechanism by blocking one of the ring ports in the ERPS ring topology.
  • Page 41 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 After the configurations, press the “Apply” button on the bottom right corner to save the settings. Figure 5.32 – Non-Configured Architecture Setup example...

  • Page 42: Spanning Tree

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.6 Spanning Tree The Spanning Tree Protocol (STP), defined in the IEEE Standard 802.1d, can be created within a mesh network of connected layer-2 switches. The Rapid Spanning Tree Protocol (RSTP), defined in the IEEE 802.1w. RSTP is an enhanced solution of STP.

  • Page 43: Rstp Configuration

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.6.2 RSTP Configuration Users can enable/disable the RSTP function, and set the parameters for each port. Figure 5.34 – RSTP Configuration Interface Terms Value Description Users can select RSTP or MSTP function to be enabled or Mode disabled before configuring the related parameters.
  • Page 44 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 path cost for the other switch from this transmitting switch at the specified port. When path cost insert in 0, the switches will be setup as automatic data transmitting.

  • Page 45: Msti Status

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.6.3 MSTI Status Users can display the MSTI root status and port status by selecting the instance ID number from 1 to 15 by clicking on the dropdown box from the “MSTI Status” interface.
  • Page 46 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 Terms Value Description MTSI Configuration Users can insert the unique MAC address of the bridge Name switch. Revision Users can insert the value from 0~65535 MTSI Instance Instance No. & VLAN...
  • Page 47 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 Terms Value Description Users can select Instance Tab #1~#15 to configure each Instance Tabs MSTI port “Cost” & “Priority” value. Users can define the path cost value from 1 through...

  • Page 48: Igmp Snooping

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.7 IGMP Snooping The Internet Group Management Protocol (IGMP) is a communications protocol used to manage the membership of Internet Protocol multicast groups. IGMP is used by IP hosts and adjacent multicast routers to establish multicast group memberships.

  • Page 49: Igmp Snooping Status Table

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 Terms Value Description IGMP Protocol Check the box to enable or disable IGMP Snooping Switch will be IGMP querier or not. There should have Querier the existing one and only one IGMP querier in an IGMP application –...

  • Page 50: Q Vlan Settings

    VLAN Identifier (VID) that indicates the VLAN numbers. The managed switches also provide users with a defined management VLAN, so that users can connect an Antaira switch to other “commercial” switches that have existed and set a non VLAN 1 management VLAN.

  • Page 51: Qos (Traffic Prioritization)

    This ensures that network traffic is prioritized according to specified criteria and receives preferential treatments. Traffic Prioritization includes three modes: port base, 802.1p/COS, and TOS/DSCP. By traffic prioritization function, users can classify the traffic into four classes for differential network application. All of Antaira’s industrial managed switches support four priority queues.

  • Page 52: Qos Classification

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.9.1 QoS Classification Figure 5.48 – QoS Classification Interface Terms Value Description Users can set it as “Weighted” or “Strict” Weighted Mode: An 8, 4, 2, 1 weighting is applied to each round robin priority queue.

  • Page 53: Cos Mapping

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 Users can set each port’s priority queue from 0 to 7 by Default Cost clicking from dropdown box; of which 0 is the Highest, and 7 is the Lowest Click the “Apply”...

  • Page 54: Port Trunk

    5-Gigabit link, and each port supports only 1-Gigabit link, the “Port Trunk” allows users to link 5 of 1-Gigabit ports to obtain a 5-Gigabit trunk feature. All Antaira’s industrial managed switches support 2 types of Port Trunk. One is LACP (dynamic) and the other is Static.

  • Page 55: Trunk Status

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.10.1 Trunk Status The below graph is the Port Trunk Status. Figure 5.54 – Port Trunk Status The below table describes the term and value description of “Port Trunk”.

  • Page 56: Port Mirroring

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 The below table describes the field of the terms and value descriptions of “Port Trunk”. Terms Value Description Type “LACP” for dynamic trunking, and type “Static” for Aggregation Group Type static trunking.

  • Page 57: Snmp

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.12 SNMP Simple Network Management Protocol (SNMP) is the protocol developed to manage nodes (servers, workstations, routers, switches and hubs etc.) on an IP network. SNMP enables network administrators to manage network performance, find and solve network problems, and plan for network growth.
  • Page 58 SNMP General - Terms Value Description All Antaira Managed Switches support SNMP v1, v2c, and v3 server. Users can enable all SNMP server v1, v2c and v3, or enable only v1 SNMP Version and v2c, or enable only enable v3.

  • Page 59: Snmp Trap Setting

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 User Auth Type The method used to encrypt the passphrase “Auth Passphrase” is a string used to authenticate (User). The range Auth Passphrase of length is from 8 to 32 characters with only numeric and alphabet characters accepted.

  • Page 60: Dhcp Server / Rely

    1 DHCP Server, so that DHCP Clients will have more resources. DHCP Relay Option 82 Users can also use the information of DHCP Relay Option 82 to distribute IP address. Antaira’s industrial managed switches provides “Cisco-like” Option 82 format. It contains Circuit ID and Remote ID.
  • Page 61 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 Figure 5.64 – DHCP Relay Option 82 Circuit ID Field Description VLAN The management VLAN ID. Always VLAN 1. Module The stack number. Always 0 here. It is the incoming port number from DHCP Client, and the port Port number is started by 1.

  • Page 62: Dhcp Client

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.13.1 DHCP Client The below figure is the IP Setting of DHCP Client. Figure 5.68 – DHCP Client IP Configuration The below table describes the field of the DHCP Client terms and value descriptions.

  • Page 63: Dhcp Server Binding

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 The below table describes the field of the DHCP Server terms and value description. Terms Value Description DHCP Server Status, It shows “Down” when “Disable”, and it shows Server Status “Up”...

  • Page 64: Dhcp Relay

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.13.4 DHCP Relay Figure 5.74 – DHCP RELAY Interface DHCP RELAY Terms Value Description “Enable” or “Disable” DHCP Relay Agent Enable “Enable” or “Disable” DHCP Relay Option 82 Relay Option 82...

  • Page 65: Settings

    802.1X also provides more security because it only allows traffic transmitting on authenticated ports or MAC addresses. Although the IEEE standard defined it as a “Port-based” control, to provide more robust service, Antaira implements all managed switches with 802.1X to a “MAC-based” access control.

  • Page 66: Local Database

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 The below tables describes 802.1X Terms and Value Description. 802.1X Terms Value Description Check the checkbox to enable “802.1X” protocol. 802.1X Enable “Local” for authenticating with local server setting on the “Local Server Type Database”...

  • Page 67: Radius Server

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 The below table describes Local Database Terms and Value Description. Terms Value Description The user name use to authenticate in 802.1X when server set to User Name “Local”. The password use to authenticate in 802.1X when server set to “Local”.

  • Page 68: Upnp

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.15 UPnP Universal Plug and Play (UPnP) is a set of networking protocols that were promoted by the UPnP Forum. UPnP Protocol permits networked devices to discover each other's presence on the network and seamlessly establish functional network services for data sharing, communications, and entertainment.

  • Page 69: Modbus Tcp

    According to the standard, Modbus encapsulates the message with an Ethernet TCP/IP wrapper. Antaira’s industrial Managed Ethernet switches support Modbus TCP/IP protocol to allow users to integrate it into those industrial control systems for real-time monitoring in a SCADA system.

  • Page 70: Modbus Data Map And Information

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.16.2 MODBUS Data Map and Information The data map addresses for Antaira’s switches are shown in the table for Function Code 6. Address Offset Data Type Interpretation Description System Information...
  • Page 71 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 Product Name = “LMP-0800G-24” 0x0030 20 words ASCII Word 0 Hi byte = ‘L’ Word 0 Lo byte = ‘M’ Word 1 Hi byte = ‘P’ Word 1 Lo byte = ‘-’...
  • Page 72 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 0x0001 : On 0x005A 1 word Fault LED Status 0x0000 : Boot error 0x0001 : Normal 0x0002 : Fault 0x0082 1 word 0x0001 : Normal 0x0002 : Fault Port Information...
  • Page 73 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 0x1400 to 0x1413 20 words ASCII Port 1 to 6 Name (Port 1) Port Name = “100FDX,RJ45.” 0x1414 to 0x1427 Word 0 Hi byte = ‘1’ (Port 2) Word 0 Lo byte = ‘0’...
  • Page 74 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 Word 0 = 0 x 1324 Word 1 = 0 x 4800 0x2200 to 2 words Port 1 to 6 Tx Error Packets 0x220B Ex : Port 1 Tx Error Packet Amount =...
  • Page 75 ERPS Port0 Port Ex : ERPS Port0 is Port1 Word 0 = 0 x0001 0x3305 1 word ERPS Port1 Port Ex : ERPS Port1 is Port2 Word 0 = 0 x0002 Figure 5.87 – Antaira Switches – Modbus Data Map & Information...

  • Page 76: System Warning

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.17 System Warning System warning function is very important for managing a switch. Users can manage the switch by “Syslog”, “System Event Log”, and “Email Server” setup for Advanced Notice in any event type, “Event Type Selection”, and “Fault Alarm”...

  • Page 77: System Event Log

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.17.2 System Event Log Users can view and display the system event log by clicking the “Apply” button on the right bottom corner of the interface. Then, the system event logs will display within the SYSLOG LIST window.

  • Page 78: Event Selection

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 Terms Value Description E-mail Alert Enable/Disable transmission system warning events by e-mail. SMTP Server Address Setting up the mail server IP address Sender E-mail Set up the email account to send the alert.

  • Page 79: Fault Alarm

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.17.5 Fault Alarm When any selected fault event has occurred, the fault LED of the switch’s front panel will light up and the electric relay will signal at the same time. Users can check the checkbox of any “Fault Alarm”...

  • Page 80: Mac Table Configuration

    5.19.1 Upgrade Antaira is continuously developing new functions and features for specific application requirements for the industrial managed switches. Users can download the latest firmware from Antaira’s website and store it within their local PC, or server.

  • Page 81: Reboot

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.19.2 Reboot Users can click the “Apply” button under the “Reboot” interface to reboot the switch. Figure 5.99 – Switch Reboot Interface 5.19.3 Default Users can reset the switch to “Factory Default” by clicking the “Apply” button under the default interface.

  • Page 82: Save

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.20.1 Save Users can click the “Save” button under the “SAVE CONFIGURATION” interface, once all the settings had been configured. Figure 5.101 – Save Setting Interface 5.20.2 Backup & Restore Figure 5.102 –...

  • Page 83: Auto Load & Backup

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 5.20.3 Auto Load & Backup 5.20.1 Figure 5.104 – USB Auto Load and Backup Setting Interface Description Terms Value Description Select USB Auto Load (plug USB stick and reboot the switch), it will auto load startup file from USB to Switch.

  • Page 84: Command Line Interface Management

    6. Command Line Interface Management 6.1 About CLI Management Besides WEB-based management, LMP-0800G-24 series also supports CLI management. Users can use console or telnet to management switch by CLI. CLI Management by RS-232 Serial Console (115200, 8, none, 1, none) Before configuring by an RS-232 serial console, use an RJ45 to DB9-F cable to connect the switches’...
  • Page 85 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 Step 2: Input a name for the new connection. Step 3: Select to use a specific COM port number.
  • Page 86 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 Step 4: The COM port property settings are as follows: 115200 for “Bits per second”, 8 for “Data bits”, None for Parity, 1 for “Stop bits” and none for “Flow control”.
  • Page 87 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 Follow the steps below to access the console via Telnet. Step 1: Telnet to the IP address of the switch from the Windows “Run” command as below. Step 2: The Login screen will appear.
  • Page 88 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 Commander Groups Command Mode Group hostname [Switch] configure no hostname configure system location [none] configure system contact [none] configure no system location configure no system contact configure System show system uptime...
  • Page 89 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 show clock timezone configure show ntp client sync [minute|hour|day|month|year] [NUMBER] configure speed [auto | 10 | 100 | 1000] [full | half] interface Duplex [auto | full | half] interface flowcontrol <receive>...
  • Page 90 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 rpl [port0 | port1] [owner | neighbor] erps aps-channel [channel ID] erps Revertive erps Clear erps port0 interface [interface name] erps port1 interface [interface name] erps fs [port0 | port1]...
  • Page 91 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 no schedule [monday~sunday] starttime interface no schedule [monday~sunday] endtime interface show power inline status interface show keepalive ip interface show keepalive time interface show schedule [monday~sunday] enable interface show schedule [monday~sunday] starttime...
  • Page 92 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 show spanning-tree max-age configure show spanning-tree cost interface show spanning-tree port-priority interface show spanning-tree link-type interface show spanning-tree auto-edge interface show spanning-tree admin-edge interface show spanning-tree stp interface spanning-tree mst [instance_ID] priority [priority]...
  • Page 93 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 no event smtp warm-start configure no event smtp authentication-failure configure no event smtp erps-change configure no event smtp interface [INTERFACE_NAME] up configure no event smtp interface [INTERFACE_NAME] down configure...
  • Page 94 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 show event syslog interface [INTERFACE_NAME] up configure show event syslog interface [INTERFACE_NAME] down configure event alarm power1 enable configure event alarm power2 enable configure event alarm interface [INTERFACE_NAME] down...
  • Page 95 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 no smtp authentication password configure no smtp receive [1 | 2 | 3 | 4] configure show smtp state configure show smtp sender configure show smtp subject configure show smtp server address...
  • Page 96 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 snmp trap v3 encryption [des | aes] [PASSWORD] configure no snmp trap enable configure no snmp trap host configure no snmp trap version configure no snmp trap community configure...
  • Page 97 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 qos map cos [priority_type] to tx-queue [queue] configure qos map dscp [[priority_type] to tx-queue [[queue] configure qos trust [cos | dscp] interface qos default cos [cos_default_value] interface no qos queue-schedule...
  • Page 98 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 dhcp server name-server [dns_ip] configure dhcp server lease [dhcp_lease_time] configure dhcp server binding [bind_num][MAC] [bind_IP] configure dhcp server port-binding [Port] [bind_IP] configure dhcp service relay configure dhcp relay server [server_number] [IP]...
  • Page 99 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 no upnp advertisement interval configure show upnp enable configure show upnp advertisement interval configure modbus tcp server configure no modbus tcp server Modbus configure show modbus tcp server configure...
  • Page 100 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 show dot1x authentication server 2 ip configure show dot1x authentication server 2 port configure show dot1x authentication server 2 share-key configure show dot1x local-db [USER] [PASSWORD] configure show dot1x brief...
  • Page 101 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 Fill in the folder and filename behind the “copy running-config usb” command. Ex: file1, / folder /file2. 2. CLI : enable -> configure terminal ->copy startup-config usb (path) Fill in the folder and filename behind the “copy startup-config usb” command.
  • Page 102 Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 Upgrade via TFTP CLI : enable -> configure terminal ->tftp server ip [IP_ADDRESS] ->tftp file name [UPGRADE_FILE_NAME] ->tftp upgrade Fill in the TFTP server IP and upgrade file name behind the “tftp server ip [IP_ADDRESS]” and “tftp...

  • Page 103: Technical Specifications

    Antaira Technologies - Industrial Ethernet Switches LMP-0800G-24 Series User Manual V1.0 7. Technical Specifications Table 7.1 has the technical specifications for Antaira’s LMP-0800G-24 series: 8-port industrial gigabit PoE+ managed Ethernet switch with 8*10/100/1000Tx (PSE: 30W/Port) ports. IEEE 802.3 10Base-T 10Mbit/s Ethernet IEEE 802.3u...
  • Page 104 Antaira Customer Service and Support (Antaira US Headquarter) + 844-268-2472 (Antaira Europe Office) + 48-22-862-88-81 (Antaira Asia Office) + 886-2-2218-9733 Please report any problems to Antaira: www.antaira.com support@antaira.com www.antaira.eu info@antaira.eu www.antaira.com.tw info@antaira.com.tw Any changes to this material will be announced on the Antaira website.

Table of Contents