ANTAIRA LMP-0601G-SFP-24-T User Manual
  1. Manuals
  2. Brands
  3. ANTAIRA Manuals
  4. Switch
  5. LMP-0601G-SFP-24-T
  6. User manual

ANTAIRA LMP-0601G-SFP-24-T User Manual

6-port industrial poe+ gigabit managed ethernet switch
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Antaira Industrial Ethernet Switches
LMP-0601G-SFP Series User Manual V1.1
LMP-0601G-SFP Series
6-Port Industrial PoE+ Gigabit Managed Ethernet Switch, with
4*10/100/1000Tx (30W/Port), 1*10/100/1000Tx, and 1*100/1000
SFP Slot; 48~55VDC Power Input
User Manual
Version 1.1
i

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LMP-0601G-SFP-24-T and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ANTAIRA LMP-0601G-SFP-24-T

Summary of Contents for ANTAIRA LMP-0601G-SFP-24-T

  • Page 1 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 LMP-0601G-SFP Series 6-Port Industrial PoE+ Gigabit Managed Ethernet Switch, with 4*10/100/1000Tx (30W/Port), 1*10/100/1000Tx, and 1*100/1000 SFP Slot; 48~55VDC Power Input User Manual Version 1.1...
  • Page 2 Trademark Information Antaira is a registered trademark of Antaira Technologies, LLC, Microsoft Windows and the Windows logo are the trademarks of Microsoft Corp. NetWare is the registered trademark of Novell Inc. WMM and WPA are the registered trademarks of Wi-Fi Alliance.
  • Page 3 Industrial Grade PoE Gigabit Managed Ethernet Switches User Manual Version 1.1 (March 2018) This manual supports the following models:  LMP-0601G-SFP  LMP-0601G-SFP-T This document is the current official release manual. Please check our website (www.antaira.com) for any updated manual or contact us by e-mail (support@antaira.com).

  • Page 4: Table Of Contents

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 Table of Contents 1. Introduction ..............1 1.1 Product Overview ..........1 1.2 Product Software Features ........ 1 1.3 Product Hardware Features ....... 2 1.4 Package Contents ..........2 1.5 Safety Precaution ..........3 2.
  • Page 5 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 5.2 Basic Setting ............ 16 5.2.1 System Information ........16 5.2.2 Admin &Password ........17 5.2.3 IP Setting............. 18 5.2.4 System Time ..........19 5.3Port Management ..........20 5.3.1 Port Status ..........20 5.3.2 Port Configuration ........
  • Page 6 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 5.6.3 MSTI Status ..........37 5.6.4 MSTI Configuration ........38 5.7. 802.1Q VLAN ..........40 5.7.1 802.1Q VLAN Settings ........ 40 5.7.2 802.1Q VLAN Settings ........ 41 5.8. IGMP Snooping ..........41 5.8.1 IGMP Settings ..........
  • Page 7 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 5.12.3 SMTP Setting ..........52 5.12.4 Event Selection ......... 53 5.12.5 Fault Alarm ..........53 5.13 MAC Table ............54 5.13.1 MAC Address Table ........54 5.13.2 MAC Table Configuration ......54 5.14 Maintenance ..........

  • Page 8: Introduction

    LMP-0601G-SFP Series User Manual V1.1 1. Introduction Antaira Technologies’ industrial managed switches come with a pre-installed “user friendly” web console interface, which allows users to easily configure and manage the units, whether one is using a serial console and command line interface(CLI) commands like Telnet, SSH, HTTP (Web GUI) or simple network management protocols (SNMP).

  • Page 9: Product Hardware Features

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1  PoE ports weekly power scheduling  Port Configuration  Status, statistics, mirroring, rate limiting, event syslog  Event Handling  Event notification by Email: Cold/Warm Start, Power Failure, Authentication, SNMP trap and Fault Alarm Relay Output ...

  • Page 10: Safety Precaution

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 1.5 Safety Precaution Attention: If the DC voltage is supplied by an external circuit, please use a protection device on the power supply input. The industrial Ethernet switch’s hardware specs, ports, cabling information, and wiring installation will be...

  • Page 11: Hardware Description

    LMP-0601G-SFP Series User Manual V1.1 2. Hardware Description 2.1 Physical Dimensions Figure 2.1, below, shows the physical dimensions of Antaira’s LMP-0601G-SFP series: 6-port industrial PoE+ gigabit managed Ethernet switch with 4*10/100/1000Tx (30W/Port), and 1*10/100/1000Tx, and 1*100/1000 SFP slot. (W x D x H) is 46mm x 99mm x 142mm Figure2.1...

  • Page 12: Front Panel

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 2.2 Front Panel The front panel of the LMP-0601G-SFP series industrial PoE+ gigabit managed Ethernet switches is shown below in Figure 2.2. Figure2.2 The Front Panel of LMP-0601G-SFP Series 2.3 Top View Figure 2.3 below, shows the top panel of the LMP-0601G-SFP series switch is equipped...

  • Page 13: Led Indicators

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 2.4 LED Indicators There are LED light indicators located on the front panel of the industrial Ethernet switch that display the power status and network status. Each LED indicator has a different color and has its own specific meaning, see below in Table 2.1.

  • Page 14: Ethernet Ports

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 2.5 Ethernet Ports  RJ-45 Ports RJ-45 Ports (Auto MDI/MDIX): The RJ-45 ports are auto-sensing for 10Base-T, 100Base-TX, or 1000Base-TX connections. Auto MDI/MDIX means that the switch can connect to another switch or workstation without changing the straight-through or crossover cabling.
  • Page 15 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 The following figures show the cabling schematics for straight-through and crossover. Figure 2.4 Figure 2.5 Straight-Through Cable Schematic Crossover Cable Schematic The following figures show the 10,100, and 1000 Ethernet RJ-45 pin outs.

  • Page 16: Cabling

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 2.6 Cabling  Twisted-pair segments can be connected with an unshielded twisted pair (UTP) or shielded twisted pair (STP) cable. The cable must comply with the IEEE 802.3u 100Base TX standard (e.g. Category 5, 5e, or 6). The cable between the equipment and the link partner (switch, hub, workstation, etc.) must be less than 100 meters (328 ft.) long.
  • Page 17 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1  Second, insert the fiber cable of the LC connector into the transceiver as shown below in Figure2.11. Figure 2.11 - LC Connector to the Transceiver  To remove the LC connector from the transceiver, please follow the steps shown below: ...

  • Page 18: Wiring The Power Inputs

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 2.7 Wiring the Power Inputs Please follow the steps below to insert the power wire. 1. Insert the positive and negative wires into the PWR1 (V1+, V1-) and PWR2 (V2+, V2-) contacts on the terminal block connector as shown below in Figure 2.14.

  • Page 19: Mounting Installation

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 3. Mounting Installation 3.1 DIN-Rail Mounting The DIN-Rail is pre-installed on the industrial Ethernet switch from the factory. If the DIN-Rail is not on the industrial Ethernet switch, please see Figure 3.1 to learn how to install the DIN- Rail on the switch.

  • Page 20: Wall Mounting

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 3.2 Wall Mounting Follow the steps below to mount the industrial Ethernet switch using the wall mounting bracket as shown below in Figure 3.4. 1. Remove the DIN-Rail bracket from the industrial Ethernet switch by loosening the screws.

  • Page 21: Hardware Installation

    LMP-0601G-SFP Series User Manual V1.1 4. Hardware Installation 4.1 Installation Steps This section will explain how to install Antaira’s LMP-0601G-SFP series: 6-port industrial PoE+ gigabit managed Ethernet switch with 4*10/100/1000Tx (30W/Port), 1*10/100/1000Tx RJ45 ports and 1*100/1000 SFP Slot. Installation Steps 1.

  • Page 22: Web Management

    This section introduces the configuration by web browser. 5.1.1 About Web-Based Management All of Antaira’s industrial managed switches are embedded with HTML web console interfaces that have a flash memory on the CPU board. It is a “user friendly” design with advanced management features that allow users to manage the switch from anywhere on the network through any Internet browser, such as Internet Explorer (version 9.0 or above is recommended),...

  • Page 23: Basic Setting

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 3. The login screen appears. 4. Key in the default username: admin and password admin. 5. Click the “Login” button, then the main (status) page of the Web Console will appear (Figure 5.2).

  • Page 24: Admin &Password

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 Terms Value Description Factory Default: Switch *Users can assign any name label to identify this managed node. By convention, a domain name is a text string drawn from System Name the alphabet (A-Z, a-z), digits (0-9), minus sign (-). No space characters are permitted as part of a name.

  • Page 25: Ip Setting

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 Terms Value Description New Password Users can assign a new password, and the maximum string length allowed is 0 to 31 characters. Confirmation Re-type the new password. Click “Apply” to save changes.

  • Page 26: System Time

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 Subnet Mask Assign the subnet mask of the IP address. If the DHCP client function is enabled, the user is not required to assign the subnet mask. Gateway Assign the network gateway for the switch. If the DHCP client function is enabled, the user is not required to assign the Gateway.

  • Page 27: Port Management

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 5.3Port Management 5.3.1 Port Status The following information provides the current port status. Figure 5.11 – Port Status Interface 5.3.2 Port Configuration Users can assign or insert a “value/label” for each port under each “Port Name” box; enable or disable each port function;...

  • Page 28: Poe (Power-Over-Ethernet)

    Figure 5.13 – Port Configuration Description 5.4PoE (Power-over-Ethernet) LMP-0601G-SFP series is one of Antaira’s industrial PoE+ managed switches that has four built- in IEEE802.3at complaint ports, and each PoE port would support PoE output power up to a maximum of 30W per port. It is also backward compatible with IEEE 802.af to support any standard PoE powered devices (PD).

  • Page 29: Ping Alarm

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 Terms Value Description Port No. PoE Port Number Any PoE port will automatically detect any powered device (PD) that Status is connected and it will display the situation. Users can use the dropdown box to enable or disable any PoE port Mode function.

  • Page 30: Poe Schedule

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 5.4.3 PoE Schedule For energy saving or power recycle powered devices, the PoE managed switch’s PoE schedule interface allows users to appoint any date and time to enable or disable PoE functions for each PoE port.

  • Page 31: Erps

    Antaira is proud to introduce and implement Ethernet Ring Protection Switching (ERPS) protocol as a standard ring solution for network redundancy with all new industrial managed Ethernet switches.

  • Page 32: Erps Status

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 5.5.1 ERPS Status Below, Figure 5.18, shows the network redundancy ring status with the Ethernet Ring Protection Switch (ERPS) protocol. Figure 5.18 – Redundant Ring Network – ERPS Status 5.5.2 ERPS Configuration Below, Figure 5.19, shows the ERPS configuration interface.
  • Page 33 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 Terms Value Description Protocol “Enable” or “Disable” ERPS protocol ERPS ring port 0, can be mapped to port 1 – port 6. Ring Port 0 Do not set the same as Ring port 1.

  • Page 34: Before Configuring Erps

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 5.5.3 Before Configuring ERPS Before configuring ERPS, the rapid spanning tree protocol (RSTP), or multiple spanning tree protocol is required to disabled, because only one protocol can be exclusively running within a switch.
  • Page 35 ITU-T G.8032 defines three roles in ERPS, which are “RPL Owner Node”, “RPL Neighbor Node”, and “Normal Node”. Below are two scenarios describing how to configure the ERPS in Antaira industrial managed Ethernet switches. Users can reference it to configure the managed switch as RPL-configured...
  • Page 36 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 5.5.3.1 Scenario A – RPL Configured Architecture Under scenario A, there are three major roles that are required to be configured within the ERPS configuration. Figure 5.24 – RPL-Configured Architecture Caution: Before enabling any ERPS protocols on any of the Ring Nodes, please DO NOT connect all switches to form a loop (ring) network just yet.
  • Page 37 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 [RPL Owner Node] There is only one RPL Owner Node that can be set in a ring network. In order to set up the RPL Owner Node, choose a switch and enable the “Protocol” under the ERPS Configuration interface, and follow the steps below (Figure 5.25).
  • Page 38 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 [RPL Neighbor Node] Users should choose a second managed switch that is adjacent to the first managed switch and set it up as the RPL neighbor node. For configuration, users should login to the second managed switch’s ERPS configuration interface and choose a specific port number under...
  • Page 39 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 [Normal Node] Then user should setup the rest of the managed switches’ “Role” of both “Ring Port 0 and 1” as “Normal Node” as shown above in Figure 5.27. Please be sure no duplicate port number has been chosen within a managed switch’s ERPS ring setting, the incorrect configurations...
  • Page 40 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 5.5.3.2 Scenario B – Non-Configured Architecture In some situations, users can choose not to configure the RPL owner and neighbor node; the ERPS could still work well under the mechanism by blocking one of the ring ports in the ERPS ring topology.

  • Page 41: Spanning Tree

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 Figure 5.29 – Non-Configured Architecture Setup Example 5.6 Spanning Tree The Spanning Tree Protocol (STP), defined in the IEEE Standard 802.1d, can be created within a mesh network of connected layer-2 switches.

  • Page 42: Rstp Status

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 5.6.1 RSTP Status Figure 5.30 shows the RSTP algorithm results. Figure 5.30 – RSTP Information Interface 5.6.2 RSTP Configuration Users can enable/disable the RSTP function, and set the parameters for each port.
  • Page 43 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 Terms Value Description Users can select the RSTP or MSTP function to be Mode enabled or disabled before configuring the related parameters. A value used to identify the root bridge. The bridge with...

  • Page 44: Msti Status

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 the port as an edge port, set the port to “True”. The port includes the STP mathematic calculation. Admin Non STP True is not including STP mathematic calculation. False is including the STP mathematic calculation.

  • Page 45: Msti Configuration

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 5.6.4 MSTI Configuration Users can display the MSTI root status and port status by selecting the “Instance ID” number from 1 to 15 by clicking on the dropdown box from the “MSTI Status” interface.
  • Page 46 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 Click the “Apply” button to save changes. Figure 5.35 – MSTI Configuration –Terms & Value Description Figure 5.36 – MSTI Port Configuration Interface Terms Value Description Users can select Instance Tab #1~#15 to configure each Instance Tabs MSTI port “Cost”...

  • Page 47: 802.1Q Vlan

    PVID. All of Antaira’s industrial managed switches’ have a default VLAN setting set to “none” for each port, so the users can login to the VLAN setting interface to create a VLAN Group name and choose “Tag”...

  • Page 48: 802.1Q Vlan Settings

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 5.7.2 802.1Q VLAN Settings Figure 5.39 – 802.1Q VLAN Settings Interface Terms Value Description PVID User can assign a Port VLAN ID for each port User can choose any port be “Tagged” or “Untagged”.

  • Page 49: Igmp Settings

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 decreases the workload at the end hosts since their network cards (or operating system) will not receive and filter all the multicast traffic generated in the network. IGMP has 3 versions, IGMP v1, v2, and v3, and support query group up to 256 groups.

  • Page 50: Igmp Snooping Status Table

    Traffic Prioritization includes three modes: port base, 802.1p/COS, and TOS/DSCP. By traffic prioritization function, users can classify the traffic into four classes for differential network application. All of Antaira’s industrial managed switches support four priority queues.

  • Page 51: Qos Classification

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 5.9.1 QoS Classification Figure 5.44 – QoS Classification Interface Terms Value Description Users can set it as “Weighted” or “Strict”. Weighted Mode: An 8, 4, 2, 1 weighting is applied to each round robin priority queue.

  • Page 52: Cos Mapping

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 Users can set each port’s priority queue from 0 to 7 by Default Cost clicking from dropdown box; of which 0 is the Highest, and 7 is the lowest. Click the “Apply” button to save changes.

  • Page 53: Tos Mapping

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 5.9.3 ToS Mapping ToS is an acronym for Type of Service. It is implemented as the IPv4 ToS priority control. It is fully decoded to determine the priority from the 6-bit ToS field in the IP header. The most significant 6 bits of the ToS field are fully decoded into 64 possibilities, and the singular code that results is compared against the corresponding bit in the IPv4 ToS priority control bit (0~63).

  • Page 54: Port Mirroring

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 5.10 Port Mirroring Enable or disable the mirroring feature. When enabled, a copy of matched frames will be mirrored to the destination port specified in the port mirroring interface. Figure 5.50 – Port Mirroring Configuration Interface...

  • Page 55: Snmp

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 5.11 SNMP Simple Network Management Protocol (SNMP) is the protocol developed to manage nodes (servers, workstations, routers, switches and hubs etc.) on an IP network. SNMP enables network administrators to manage network performance, find and solve network problems, and plan for network growth.

  • Page 56: Snmp Trap Setting

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 5.11.2 SNMP Trap Setting Figure 5.54 – SNMP Trap Setting Terms Value Description Enable SNMP Trap Enable the SNMP Trap function by checking the box. Users can insert the Server IP address as the Trap Trap Destination IP Destination IP info.

  • Page 57: System Warning

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 5.12 System Warning System warning function is very important for managing a switch. Users can manage the switch by “Syslog”, “System Event Log”, and “Email Server” setup for Advanced Notice in any event type, “Event Type Selection”, and “Fault Alarm”...

  • Page 58: 2System Event Log

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 Click the “Apply” button to save changes. Figure 5.57 – SYSLOG Setting Terms & Value Description 5.12.2System Event Log Users can view and display the system event log by clicking the “Apply” button on the right bottom corner of the interface.

  • Page 59: Smtp Setting

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 5.12.3 SMTP Setting The Simple Mail Transfer Protocol (SMTP) is for e-mail transmission across the Internet. Figure 5.59 – SMTP Setting Interface Terms Value Description E-mail Alert Enable/Disable transmission system warning events by e-mail.

  • Page 60: Event Selection

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 5.12.4 Event Selection Users can select any event type through the “Event Selection” interface, such as “System Cold Start”, any ports’ “Link Up”, “Link Down”, “Link Up & Link Down” and send the system warning massage to either SYSLOG or SMTP, or both at the same time.

  • Page 61: Mac Table

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 5.13 MAC Table The MAC address table is the filtering database that supports queries by the forwarding process, as to whether a frame received by a given port with a given destination MAC address is to be forwarded through a given potential transmission port.

  • Page 62: Maintenance

    Antaira is continuously developing new functions and features for specific application requirements for the industrial managed switches. Users can download the latest firmware from Antaira’s website and store it within their local PC, server, or USB drive. Figure 5.66 – Firmware Upgrade Interface...

  • Page 63: Reboot

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 5.14.2 Reboot Users can click the “Apply” button under the “Reboot” interface to reboot the switch. Figure 5.67 – Switch Reboot Interface 5.14.3 Default Users can reset the switch to “Factory Default” by clicking the “Apply” button under the default interface.

  • Page 64: Save

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 5.15.1 Save Users can click the “Save” button under the “SAVE CONFIGURATION” interface, once all the settings have been configured. Figure 5.69 – Save Setting Interface 5.15.2 Backup & Store Figure 5.70 – Backup & Restore Setting Interface...

  • Page 65: Auto Load & Backup

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 then finish by clicking the “Upload” button. USB Management Fill in the folder and filename and click the “Backup” button. If the folder or filename does not exist, the Save Running Config to USB system will generate it automatically.

  • Page 66: Logout

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 5.16 Logout Users can logout of the web console interface by clicking ‘logout’ from the menu. 6. Command Line Interface Management 6.1 About CLI Management Besides WEB-based management, LMP-0601G-SFP series also supports CLI management.
  • Page 67 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 Step 2: Input a name for the new connection. Step 3: Select a certain COM port number.
  • Page 68 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 Step 4: The COM port property settings are as follows: 115200 for “Bits per second”, 8 for “Data bits”, None for Parity, 1 for “Stop bits” and none for “Flow control”.
  • Page 69 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 CLI Management by Telnet Users can use “TELNET” to configure the switches. The default value is below:  IP Address: 192.168.1.254  Subnet Mask: 255.255.255.0  Default Gateway: none  User Name: admin ...
  • Page 70 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 Commander Groups Group Command Mode hostname [Switch] configure system location [none] configure system contact [none] configure no system location configure no system contact configure show system uptime configure show system mac...
  • Page 71 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 ntp sync hour [time] configure ntp sync day [time] configure ntp sync month [time] configure ntp sync weekly [time] configure no ntp client enable Configure no ntp client timeserver configure no clock timezone...
  • Page 72 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 show administrate interface show name interface show link status interface show link state interface show link speed interface show duplex interface show link rx interface show link tx interface show link summary...
  • Page 73 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 disable g8032 rpl [port0 | port1] [owner | neighbor] g8032 aps-channel [channel ID] g8032 revertive g8032 clear g8032 port0 interface [interface name] g8032 port1 interface [interface name] g8032 g8032 g8032 ring-id [erps ring ID]...
  • Page 74 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 no power inline priority interface no power inline max interface show power inline interface show power inline priority interface show power inline max interface show power inline status interface show power inline power-supply...
  • Page 75 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 show spanning-tree mode configure show spanning-tree priority configure show spanning-tree forward-time configure show spanning-tree hello-time configure show spanning-tree max-age configure show spanning-tree cost interface show spanning-tree port-priority interface show spanning-tree link-type...
  • Page 76 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 event smtp interface [INTERFACE_NAME] [up | down] configure no event smtp power1 configure no event smtp power2 configure no event smtp cold-start configure no event smtp warm-start configure no event smtp authentication-failure...
  • Page 77 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 show event syslog interface [INTERFACE_NAME] [up | down] configure event alarm power1 enable configure event alarm power2 enable configure event alarm interface [INTERFACE_NAME] [up | down] configure no event alarm power1...
  • Page 78 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 no smtp receive [1 | 2 | 3 | 4] configure show smtp state configure show smtp sender configure show smtp subject configure show smtp server address configure show smtp server port...
  • Page 79 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 no snmp trap enable configure no snmp trap host configure no snmp trap version configure no snmp trap community configure no snmp trap inform retry configure no snmp trap inform timeout...
  • Page 80 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 qos map dscp [[priority_type] to tx-queue [[queue] configure qos trust [cos | dscp] interface qos default cos [cos_default_value] interface no qos queue-schedule configure no qos map cos [priority_type] configure no qos map dscp [priority_type]...
  • Page 81 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 Save and Load Configuration File to/from USB CLI: enable -> configure terminal ->copy running-config usb (path) Fill in the folder and filename behind the “copy running-config usb” command. Ex: file1, / folder /file2.
  • Page 82 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 3. CLI :enable -> configure terminal ->copy usb startup-config (path) Fill in the folder and filename behind the “copy usb startup-config” command. Ex: file1, / folder /file2. 4. CLI : enable -> configure terminal ->copy usb firmware (path) Fill in the folder and filename behind the “copy usb startup-config”...
  • Page 83 Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 CLI : enable -> configure terminal -> Syslog mode (usb or all) Select USB or ALL, it can auto save the waning file to the USB. And the file name is “message”.

  • Page 84: Technical Specifications

    Antaira Industrial Ethernet Switches LMP-0601G-SFP Series User Manual V1.1 7. Technical Specifications Table 7.1 has the technical specifications for Antaira’s LMP-0601G-SFP series: 6-port industrial PoE+ gigabit managed Ethernet switch with 4*10/100/1000Tx (30W/Port), 1*10/100/1000Tx Ethernet Ports, and 1*100/1000 SFP slot. IEEE 802.3 10Base-T 10Mbit/s Ethernet IEEE 802.3u...
  • Page 85 UL 61010-1, UL 61010-2-201 Table 7.1 - LMP-0601G-SFP Series Technical Specifications Antaira Customer Service and Support (Antaira US Headquarter) + 844-268-2472 (Antaira Europe Office) + 48-22-862-88-81 (Antaira Asia Office) + 886-2-2218-9733 Please report any problems to Antaira: www.antaira.com support@antaira.com www.antaira.eu info@antaira.eu www.antaira.com.tw...

This manual is also suitable for:

Lmp-0601g-sfp seriesLmp-0601g-sfp-tLmp-0601g-sfp-24

Table of Contents