Table of Contents
Advertisement
•
Turn the reflector anticlockwise as far as it will go and take off from the
device.
Mount on tripod (optional)
A
B
•
Open the fastening screw.
•
Mount the device on the tripod.
•
Tighten the fastening screw.
6.3. Ring Flash RD-600
A
C
B
•
Open the fastening screw for adjusting the height.
•
Adjust the desired height.
A
Tripod mount
B
Fastening screw
A
Fastening screw for height adjustment
B
Fastening screw for depth adjustment
C
Fastening screw for tripod and camera mounting
14
•
Tighten the fastening screw.
•
Open the appropriate fastening screw for adjusting the depth.
•
Put the device in the desired position.
•
Tighten the fastening screw.
•
For mounting the device on a tripod and on your camera, open the
appropriate fastening screw.
•
Take your tripod or camera and tighten the fastening screw.
•
If you would like to use the diffusor, you can put it on the Ring Flash.
WARNING Select a tripod of suitable weight and dimensions. See
Technical Specifications.
WARNING Make sure, that your camera is mounted sturdily and securely
before every use. Check all fastening screws.
7.
Connect to power supply
A
B
•
Switch off device.
See Switch the device on and off.
•
Screw on protection caps.
A
Plug for flash devices
B
Protection cap for plugs
15
Advertisement
Table of Contents
