Table of Contents
Advertisement
4.2. Overview about the parts of walimex Flash Light RD-600
1
2
4
3
10
9
8
7
6
4.3. Overview about the parts of walimex Ring Flash RD-600
IV
VI
V
5
1
Flash light
2
Fuse holder
3
Flash tube
4
Modeling lamp
5
Unlocking lever standard reflector
6
Inclination lever
7
Connection cable Battery Pack
8
Fastening screw
9
Umbrella holder
10
On/Off switch
I
Ring Flash
I
II
Lamp
III
Diffusor
II
IV
Connection cable Battery Pack
III
V
Bracket for height adjustment
VI
Bracket for tripod mounting and depth
adjustment
11
10
5.
Quick-start guide
ADVICE:
The detailed instruction for the following operations can be found in the
respective chapters in this instruction manual.
Keep the sequences of the following operation steps when using the device
for the first time to avoid damages.
WARNING
Please note the safety notes in the respective chapters throughout
operation.
1. Demount protection cap.
2. Mount reflector.
3. Insert modeling lamp.
4. Mount reflex umbrella (optional).
5. Connect the device to the power supply/insert battery.
6. Switch on device.
7. Adjust modeling lamp.
8. Adjust flash output.
9. Adjust audio operating display.
10. Prepare flash trigger.
11. Mount the device on a tripod (optional).
6.
Prepare Battery Pack for operation
6.1. Charge battery
WARNING
Please note the safety notes on page 4-8.
11
10
Advertisement
Table of Contents
