Network Connection; Reset Network; Troubleshooting - POMCube iCAN NetZero Plus Series User Manual

Apple App Store
Add New Devices
(2)
Start the app and click the add device button, then scan the device QR code or
input the device code to add your devices. You can find the QR code and the
device code on the label pasted on the device.
Detailed device data, e.g. running status, history and alerts can be checked on
(3)
the APP. Set the working modes, grid type, utility rate plan, and generator
information following the guidance on the APP.

Network Connection

NOTE: A network is not required for device operation, but the device should be
connected to your router if you need to use the app to monitor it. Internet is
required only if you want to monitor the device when you are not at home.
The device can be connected to the router/internet through an active Ethernet
Cable, Wi-Fi, or 4G. Please follow the instructions in the app to get connected.

Reset Network

Press the RESET button for 4 seconds. Re-configure the network following the
instructions in the app.

Troubleshooting

In any cases of device failure, please check alarms on APP and proceed as
Google Play
50