POMCube iCAN NetZero Plus Series User Manual page 31

Install the bracket and battery system on the wall with
(6)
M6x50 tapping screws.
NOTE: If you are installing it on a concrete wall, properly drill
into the wall with M6x50 tapping screws and plastic anchors.
CAUTION: Dust collection is required during drilling.
CAUTION: Make sure the cabinet is firmly on the floor.
The wall bracket is only designed to keep the battery
system from tipping forward, not supporting the
weight of the battery.
Hang the inverter on the bracket.
(7)
NOTE: Before installing Universal PCS, remove the
battery seal cap (BAT/COM) on the bottom of
Universal PCS.
27
16in
12in