Advertisement
Quick Links
(NAVRGB6.0-VI+MBCIRC)
Mercedes-Benz CLK-Class 2005-2009
Manual Version: 1.0
NOTICE: We recommend having this installation performed by a certified technician.
All product names, logos, brands, trademarks and registered trademarks are
property of their respective owners.
Installation Manual
NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100
DESIGNED + MANUFACTURED IN THE
1
Advertisement
Related Manuals for NavTool NAVRGB6.0-VI+MBCIRC
Summary of Contents for NavTool NAVRGB6.0-VI+MBCIRC
- Page 1 DESIGNED + MANUFACTURED IN THE Manual Version: 1.0 NOTICE: We recommend having this installation performed by a certified technician. All product names, logos, brands, trademarks and registered trademarks are property of their respective owners. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
- Page 2 • Route all wires along with factory harnesses. Do not drill or make any unnecessary holes. • Always use the help of a professional installer to prevent any damage to the vehicle or the interface. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
-
Page 3: What's In The Box
What’s In The Box? Interface Push Button (Part # NAVRGB6.0-VI) (Part # NT-PUSH-BTN) Vehicle Specific Vehicle Specific Interface Harness Plug and Play Harness Plug and Play Harness (Part # NT-WHNT6) (Part # NT-PEREXODNIC) (Part # NT-MBCIRC-BOARD-KIT) NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100... - Page 4 While disconnecting the cable, do not apply any force on the locks. They are very easy to break. Be careful, and do not use sharp objects to disconnect the cable. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
- Page 5 Step 4: Run the supplied ribbon cable through the same slot as the original cable. Connect supplied flex ribbon cable to the screen, and close the locks. Carefully reinstall the plastic cover (marked red). Do not use sharp objects and do not apply force on the locks. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
- Page 6 Place the excess of the ribbon cables in same compartment as original cable. Make sure there is long enough stripe left for attaching the board to the radio. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
- Page 7 Manually close the radio front panel. Don’t force it, if the panel refuses to close – check if any of the cables preventing it from doing so. PLEASE NOTE: Camera and DVD work only in an AUDIO MODE NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
- Page 8 Camera Input/Video Input 2 on the interface harness. Step 17: Make sure both dip switches on the interface are facing UP in the OFF Position. Plug the interface harness into the interface. See Next Page for Quick Connection Diagram > NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
- Page 9 Quick Connection Diagram ON 1 Click Switches 1 and 2 UP Click Click Click NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
-
Page 10: Testing And Operation
To Turn On parking lines, place vehicle in reverse and hold 12 volts to the white wire until the lines Turn On. To Turn Off parking lines, place vehicle in reverse and hold 12 volts to the white wire until the lines Turn Off. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100... - Page 11 Step 2: Press the push button once to switch from Video 1 source to Video 2 source. Step 3: Press and Hold the push button for 2 seconds to return to the factory screen. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...