Advertisement
Quick Links
Installation Manual
Range Rover Evoque 2005-2009
Interface with HDMI Mirroring
Part #: NAVTOOL6.0-LG2-RR
NOTICE: Navtool recommends having this installation performed by a certified technician.
Logos and trademarks used here in are the properties of their respective owners.
1
Range Rover Evoque 2005-2009
Advertisement
Related Manuals for NavTool 6.0-LG2-RR
Summary of Contents for NavTool 6.0-LG2-RR
- Page 1 Installation Manual Range Rover Evoque 2005-2009 Interface with HDMI Mirroring Part #: NAVTOOL6.0-LG2-RR NOTICE: Navtool recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Range Rover Evoque 2005-2009...
- Page 2 WELCOME Table of Contents IMPORTANT WARNING Installation Instructions This product includes instructions for Precautions installation, which must be carefully followed. The instructions are worded in such a manner to assume that What’s In The Box the installer is capable of completing these types of electronic installations.
- Page 3 • Using protective blankets to cover front seats, interior of the vehicle and center console. • Always install a fuse 6-12 inches away from NavTool interface, 5 amp fuse should be used. • Always secure NavTool interface with Velcro or double side tape to prevent rattling of the interface.
- Page 4 What’s In The Box? USB Configuration Cable NavTool Interface NavTool LVDS Cables (Part # NT-USB-CNG) (Part # NAVTOOL6.0-LG2) (Part # NT-RR-LVDS) NavTool Vehicle Specific NavTool Interface Harness Plug and Play Harness (Part # NT-WHNT6) (Part # NT-RRSPL) Range Rover Evoque 2005-2009...
- Page 5 Interface Connectors Description NavTool Interface (Part # NAVTOOL6.0-LG2) USB Port for Apple CarPlay and Android Auto Main Connector for Universal Interface Harness Configuration Port HDMI Port ON 1 Dip Switches Data LED HDMI LED LVDS Cables Input and Output Power LED Main Connector for Universal Interface Harness- This port is dedicated for a connection of a universal wiring harness LVDS Cables Input and Output- This port is dedicated for the LVDS cables.
- Page 6 Universal Harness Description Rear Camera Input/ Video Input 1 Front Camera Input/ Video Input 2 NavTool Interface Harness (Part # NT-WHNT6) Left Camera Input/ Video Input 3 Right Camera Input/ Video Input 4 Connector for Vehicle Specific Harness 12V Output Wire...
- Page 7 (Part # NAVTOOL6.0-LG2) ON 1 (Part # NAVTOOL6.0-AR2-NBT) Click ON 1 NavTool Supplied Harness (Part # NT-WHNT6) - OFF Position - Both Switches Up - ON Position - Both Switches Down Switch 1 Set to ON - ON is Down...
- Page 8 Quick Connection Guide NavTool Interface See Page 7 Click Click ON 1 - OFF Position - Both Switches Up - ON Position - Both Switches Down Switch 1 Set to ON - ON is Down Switch 2 Set to ON - ON is Down...
- Page 9 Mac computers must use the latest version of the Google Chrome browser. Google computers must use the latest version of the Google Chrome browser. TO CONFIGURE THE INTERFACE, GO TO HTTPS://CONFIG.NAVTOOL.COM Connect the interface to the computer using supplied USB Configuration Cable (Part # NT-USB-CNG)
- Page 10 Installation Instructions STEP 2 Continued Navigation is located behind the cover of the left cargo area. Land Rover: Range Rover 2005-2009 Land Rover: Range Rover Evoque 2005-2009 Range Rover Evoque 2005-2009...
- Page 11 Installation Instructions STEP 2 Continued Navigation is located under driver seat. Land Rover: Range Rover Sport 2005-2009 Land Rover: LR3 2005-2009 Range Rover Evoque 2005-2009...
- Page 12 Step 2: Connect factory connectors into the supplied vehicle specific plug and play harness. Back of Navigation Continued on Step 4 Factory Wire Click NavTool Supplied Cable (Part # NT-RRSPL) (For complete image, see Quick Connection Guide on page 7) Step 2: Reconnect previously removed radio connectors into the back of the radio.
- Page 13 Installation Instructions STEP 5 Step 1: Connect the AUX plugs on NavTool Supplied Cable (Part # NT-RRSPL) to AUX cables and plug them into the AUX input of your car. NavTool Supplied Harness (Part # NT-WHNT6) AUX Input depends on the type of jack...
- Page 14 Factory LVDS Cable STEP 7 Step 1: Connect NavTool supplied LVDS cable into the blue port on the back of the navigation. Step 2: Connect NavTool supplied LVDS cable into the brown port shown in the image below. NavTool Interface...
- Page 15 • If you are adding side or front cameras, install them and plug them into the appropriate camera RCAs. • If you are installing any HDMI or streaming devices, connect it to the HDMI port of the NavTool. Range Rover Evoque 2005-2009...
- Page 16 Installation Instructions STEP 9 Plug the AUX plug you connected to the harness into the AUX input of the car. See picture below. Range Rover Evoque 2005-2009...
- Page 17 Testing and Settings STEP 1 • Start the car, observe NavTool LED lights should be one blinking blue and two steady lit green LED lights. HDMI LED Data LED Power LED • At this time, your car radio should boot up into its initial state, and the radio should be working.
- Page 18 Testing and Settings STEP 3 • Tap the Navigation button to activate NavTool interface. (see Fig. 1). You should hear a chirp, and after that, the interface will start, and the NavTool menu will appear on the screen. After activating the interface, the NavTool screen will show (see Fig.2)
- Page 19 Set vehicle in reverse gear to test the operation of the factory rear view camera. Press and hold one of the four corners of the touch screen for 3 seconds to turn OFF the NavTool inter- face. Press and hold the corner of the touch screen for a few seconds until the bottom menu appears on the screen, release the finger and hold the corner of the screen again to return to the factory menu.
- Page 20 Testing and Settings STEP 6 • Test HDMI input if you are connecting any HDMI video source. To bring up the bottom menu, press and hold one of the four touch screen corners for 3 seconds. • Touch the HDMI button on the screen to enter the HDMI input of the interface. •...
- Page 21 If all steps above are checked off, you will save time, money and have an extremely happy customer. All above steps eliminate any unnecessary customer comebacks to your shop. If you require any further assistance please call our tech support line, email or go online WWW.NAVTOOL.COM 1-877-628-8665 techsupport@navtool.com Range Rover Evoque 2005-2009...
- Page 22 Interface Menus and Settings NavTool Interface Screen Press the Navigation button on the screen to activate NavTool interface. Press and hold one of the four corners of the touch screen to deactivate NavTool interface. After you activated the interface, you will be brought to this screen that you can navigate using the factory touch screen.
- Page 23 Apple CarPlay/Android Auto screen. Apple CarPlay/Android Auto Module Not Installed You will get this message when selecting this option on the NavTool interface that is not equipped with Apple CarPlay/ Android Auto module. HDMI Tap the HDMI button to enter this option.
- Page 24 Interface Menus and Settings Back-Up Camera Tap the Back-Up Camera button to enter this option. After selecting the back-up camera input, you will be brought to your back up camera screen. This will not work if a back-up camera is not installed. (Note: This input will not display factory installed rear-view camera) To exit Back-Up Camera, tap the touch screen to bring up the bottom menu.
- Page 25 Interface Menus and Settings Settings Tap the Settings Menu button to enter this option. After selecting the settings option, a menu will expand showing different interface settings you can change. Settings Options Menu The Settings Menu button will change to a down arrow once clicked on.
- Page 26 Interface Menus and Settings Camera Settings Tap the Camera Settings button to enter this option. Camera Settings Menu Tap to select a particular camera input. Tap repeatedly to change the option to what you want for that particular camera input. Factory camera: Select this option if your vehicle is equipped with a factory installed rear view camera.
- Page 27 Interface Menus and Settings For most installations, there is no need to enter below menus Parking Line Settings (These line adjustments are only for aftermarket cameras, they do not affect factory cameras) Tap the Parking Line Settings button to enter this option. You can only access this setting when you are on the particular camera input.
- Page 28 Set this feature to ON if you want to directly enter into the Apple CarPlay/Android Auto mode when activating the interface, Set this feature to OFF if you want to enter NavTool menu upon and bypasing the NavTool menu. Do not select this mode if you activation of the interface.
- Page 29 How to Connect Rear Screens to Car With AV Input Examples of equiptment used if connecting or installing additional rear screens Car Monitor NavTool Interface HDMI to AV Adaptor 1 in 2 Out HDMI Splitter HDMI Sources Range Rover Evoque 2005-2009...
- Page 30 How to Connect Rear Screens to Car With HDMI Input Examples of equiptment used if connecting or installing additional rear screens Car Monitor NavTool Interface Car HDMI Input 1 in 2 Out HDMI Splitter HDMI Sources Range Rover Evoque 2005-2009...
- Page 31 FM, or XM, if equipped, Disc, or AUX (Auxiliary). Must set a radio to auxiliary/AUX before activating NavTool to hear audio from car speakers. • Audio will not play through car speakers if AUX is not connected or radio is not set to AUX input.
- Page 32 NavTool Apple CarPlay/Android Auto interface will play via AUX input of the radio. See Page 1 for details. • Press the Navigation button on screen to activate NavTool interface. (see Fig.1) You should hear a chirp, and after that, the interface will start, and the NavTool menu will appear on the screen.
- Page 33 Set this feature to ON if you want to directly enter into the Apple CarPlay/Android Auto mode when activating the interface, Set this feature to OFF if you want to enter NavTool menu upon and bypasing the NavTool menu. Do not select this mode if you activation of the interface.
- Page 34 User Manual Interface Settings Parking Line Settings Typically adjusted by installer. Camera Settings Typically adjusted by installer. Contrast Tap the Contrast button to enter this option. After selecting contrast, you can adjust the contrast of the inter- face. The white bar in the middle shows the interface contrast setting.