Summary of Contents for NavTool NAVRGB6.0-AR1-NBT+HA12+BTR
Page 1
DESIGNED + MANUFACTURED IN THE Manual Version: 1.0 NOTICE: We recommend having this installation performed by a certified technician. All product names, logos, brands, trademarks and registered trademarks are property of their respective owners. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 2
• Route all wires along with factory harnesses. Do not drill or make any unnecessary holes. • Always use the help of a professional installer to prevent any damage to the vehicle or the interface. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 5
Right Audio Output- Connect the Audio output RCAs to the AUX input on the vehicle. If needed use either the extension cable or RCA to 3.5 mm jack adaptor (if supplied) to make the connections. (See Installation Instructions section of the manual). NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Chromecast, or similar devices because damage to the unit can occur.) HDMI Port- This port is dedicated for connecting video sources such as iPhone mirroring, Android Mirroring, Apple TV, Roku, FireStick, Chromecast, PlayStation, Xbox, or similar devices. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
TO CONFIGURE THE INTERFACE, GO TO HTTPS://CONFIG.NAVTOOL.COM Connect the interface to the computer using supplied USB Configuration Cable (Part # NT-USB-CNG) Configuration Port To see a video of the configuration process Scan QR-Code or go to https://youtu.be/iES_rW240X0 NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 8
Click Joystick Receiver Click Click Microphone Click Vehicle’s Navigation System Located Vehicle’s Under Front Seat 10 Pin AUX Input Factory Harness Connector Do Not Connect Behind Radio or (Part # NT-HA12) Behind Screen NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Step 10: Make sure both dip switches are “UP” in the off position. Then plug in the main harness into the interface. (See Page 8). Optional, connect your HDMI device to the back of the interface. Connect aftermarket cameras or video source to the video input RCAs on the interface harness. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
LED on the joystick receiver blinks when pressing any buttons. If it does not light up, twist open the lid of the remote. Open the battery door and insert or replace batteries. Receiver LED Back Button NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Press and hold for 3-5 seconds to turn the interface ON or OFF. Voice- Press to activate Siri or Ok Google. Menu- Brings up the interface’s bottom menu to change inputs or go into settings. Enter- ENTER button NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
(Up and Down buttons on the supplied remote do not apply) Note: Pressing the Enter button on the supplied remote while the Down Triangle is selected (see right image) will close the interface settings menu bar. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 13
Rotate the wheel on the supplied remote to select the +Plus or -Minus icon. Press the Enter button on the supplied remote to increase or decrease the contrast. Save or Cancel your changes. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Parking lines: Select this option if you are installing an aftermarket forward facing camera and you wish to add distance lines to the camera image. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 15
Image on the left shows a typical installation of the interface done on a vehicle that has a factory rear view camera that is not equipped with any other factory or aftermarket cameras. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 16
The colored square in the middle shows what color parking line you are making changes to. Select the colored square in the middle and press the Enter button on the supplied remote to change color. Save or cancel your changes. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Do not change if they have off. Do not change unless your manual tells you or if done by an set this to on. installer. Manual Activation Wire as Reverse Trigger +12V should be set to OFF. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 18
Press the Enter button on the supplied remote control to view the selected Camera / Video Input. Note: If the vehicle has factory cameras such as a factory rear view camera, you will not be able to manually view them from here. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 19
Go to Settings and select Audio Settings (See right image) Original MIC Original MIC Turn Original MIC OFF Select the back arrow on the top left of the screen to go back to the previous Settings Menu. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 20
Wireless CarPlay Settings Wireless Android Auto Settings Pairing Discover and Connect Devices Turn on your phone’s Bluetooth and search CX_BTFC4BBCCAB01D then connect it Turn on your phone’s Bluetooth and search CX_BTFC4BBCCAB01D then connect it NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 21
Apple CarPlay/Android Auto (Auto On Mode) to OFF in the Interface Miscellaneous Settings or disconnect your phone from the interface or turn off your phone’s Wifi and Bluetooth. See Interface Menus and Settings section of the manual for details about different settings options. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 22
Check to see if any other panels that were removed during installation and now being reassembled have all and any electrical connectors reconnected. Turn on parking light and check all dashboard lights operation. Check all panels for proper fitting. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 23
Interface Menus and Settings Interface Screen After activating the interface, you will be brought to this screen that you can navigate with the factory joystick remote. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 24
Apple CarPlay Screen Example of Apple CarPlay screen. Apple CarPlay is controlled via factory joystick. Selections are done by rotating joystick left or right, enter button to select. Menu button to go back. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 25
Selecting this option will take you back to the interface menu. Settings Press enter button on joystick to enter this option. Selecting this option will allow you to change your Apple CarPlay and Android Auto settings. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 26
If they hear too much noise, you want to make it less sensitive all the way down to 1 or 2. If they don’t hear you loud enough, you can increase sensitivity to desired level. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 27
This setting must be set to OFF if you received an external microphone with your interface, your vehicle is not equipped with a compatible factory microphone. Press enter on the joystick to save this option. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 28
Wireless CarPlay Connection Select option by rotating joystick to a desired option, then press enter on the joystick to adjust the setting. You can select this option to change wireless CarPlay option ON or OFF. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 29
Bluetooth connection available for your phone to connect to and pair to the interface. Rotate your joystick to the back button on the top left corner to go back to your Apple CarPlay settings. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 30
Select option by rotating joystick to a desired option, then press enter on the joystick to adjust the setting. You can select this option to change wireless Android Auto option ON or OFF. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 31
There is no need to enter this option unless you need to delete a phone in the future. Rotate your joystick to the back button on the top left corner to go back to your Android Auto settings. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 32
UI Settings- Driver Position Select option by rotating joystick to a desired option, then press enter on the joystick to adjust the setting. You can select or change which driver position you are in. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 33
UI settings. Language Select option by rotating joystick to a desired option, then press enter on the joystick to adjust the setting. You can select this to change the language of the interface. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 34
Selecting this will let you reset your interface options. Rotate your joystick to the back button on the top left corner to go back to your information settings. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 35
Factory Mode Do not enter this mode as it is password protected and changing any features will break the interface. Press and hold the menu button until you see the bottom menu. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 36
No HDMI Signal You will get this message when selecting this input with no HDMI source connected to interface. This part of the page has been intentionally left blank NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 37
This will not work if a right lane watch camera is not installed. (Note: This input will not display factory installed right lane watch camera) NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 38
You can lower the contrast of the interface by selecting the icon on the left and you can increase the contrast of the interface by selecting the icon on the right. Save or cancel any changes you have made. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 39
Parking lines: Select this option if you are installing an aftermarket right lane watch camera and you wish to add distance lines to the camera image. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 40
Down check to save your changes. X to cancel your changes. You can move your parking lines down by selecting the down arrow for your selected parking line. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 41
Do not change if they have off. Do not change unless your manual tells you or if done by an set this to on. installer. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 42
If the interface is not displaying on the screen, please check that the remote control buttons light up when pressing any buttons. If it does not light up, twist open the lid of the remote. Open the battery door and insert or replace batteries. Back Button NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 43
Press and hold for 3-5 seconds to turn the interface ON or OFF. Voice- Press to activate Siri or Ok Google. Menu- Brings up the interface’s bottom menu to change inputs or go into settings. Enter- ENTER button NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 44
If the vehicle is equipped with CAN, aftermarket front camera will automatically show when in drive up to 5-10 mph, and aftermarket left and right cameras will automatically show when activating left and right turn signals. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 45
Wireless CarPlay Settings Wireless Android Auto Settings Pairing Discover and Connect Devices Turn on your phone’s Bluetooth and search CX_BTFC4BBCCAB01D then connect it Turn on your phone’s Bluetooth and search CX_BTFC4BBCCAB01D then connect it NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Page 46
Apple CarPlay/Android Auto (Auto On Mode) to OFF in the Interface Miscellaneous Settings or disconnect your phone from the interface or turn off your phone’s wifi and Bluetooth. See Interface Menus and Settings section of the manual for details about different settings options. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
Need help?
Do you have a question about the NAVRGB6.0-AR1-NBT+HA12+BTR and is the answer not in the manual?
Questions and answers