NavTool NAVRGB6.0-VI Installation Instructions Manual
Toyota 4runner 2003-2004
Hide thumbs
Also See for NAVRGB6.0-VI:
- Installation manual (7 pages) ,
- Installation manual (13 pages) ,
- Installation manual (7 pages)
Advertisement
Quick Links
Manual Version: 1.0
NOTICE: We recommend having this installation performed by a certified technician.
All product names, logos, brands, trademarks and registered trademarks are
property of their respective owners.
Installation Manual
(NAVRGB6.0-VI+TL10)
Toyota 4Runner 2003-2004
NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100
DESIGNED + MANUFACTURED IN THE
1
Advertisement
Related Manuals for NavTool NAVRGB6.0-VI
Summary of Contents for NavTool NAVRGB6.0-VI
- Page 1 DESIGNED + MANUFACTURED IN THE Manual Version: 1.0 NOTICE: We recommend having this installation performed by a certified technician. All product names, logos, brands, trademarks and registered trademarks are property of their respective owners. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
-
Page 2: Important Warning
• Route all wires along with factory harnesses. Do not drill or make any unnecessary holes. • Always use the help of a professional installer to prevent any damage to the vehicle or the interface. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100... -
Page 3: What's In The Box
What’s In The Box? Push Button Interface (Part # NT-PUSH-BTN) (Part # NAVRGB6.0-VI) Vehicle Specific Interface Harness Plug and Play Harness (Part # NT-WHNT6) (Part # NT-TL10) NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100... - Page 4 Quick Connection Diagram ON 1 Click Switches 1 and 2 UP Click Vehicle’s Navigation System Location Sedans: Trunk SUVs: Under Front Seat Factory Harness Do Not Connect (Part # NT-TL10) Behind Radio or Behind Screen NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
-
Page 5: Installation Instructions
Step 12: Make sure both dip switches on the interface are facing UP in the OFF Position. Plug the interface harness into the interface. Wire Side View of the 18 PIN Connector Located Behind the Vehicle’s DVD-ROM Navigation System Pin 14: Reverse Wire Pin 17: Ground Wire Pin 18: Accessory Wire NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100... -
Page 6: Testing And Operation
If you see the navigation image ghosting on the screen when one of the video inputs is activated, cut the wire to the right of the yellow wire on the male end of Supplied Vehicle Specific Harness TL10. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100... - Page 7 Step 2: Press the push button once to switch from Video 1 source to Video 2 source. Step 3: Press and Hold the push button for 2 seconds to return to the factory screen. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...