Fein GBA 18V Manual page 13

13
en
Do not use a damaged battery. The use of a battery
must be stopped immediately as soon as abnormal
properties, such as odour development, heat, discol-
ouration or deformation occur. Continued operation
can cause the battery to generate heat and smoke,
ignite or explode.
Do not open, crush, overheat or set fire to the battery.
Non-observance of this warning may result in burns
and fire. Follow the manufacturer's instructions.
Extinguish burning Li-ion batteries with water, sand or
a fire blanket.
Avoid physical blows/impact. Impact and penetration
of objects can damage batteries. This may result in
leakage, heat build-up, smoke generation, ignition or
explosion of the battery.
Never charge the battery unattended overnight. Fire
and explosion hazards can result in case of non-
observance.
Do not remove the battery from its original packaging
until it is going to be used.
Remove the battery only when the power tool is
switched off.
Before any work on the machine itself, remove the bat-
tery from the power tool. If the power tool accidentally
starts, there is danger of injury.
Protect the battery against moisture and water. Clean
contaminated battery terminals and power tool con-
nections with a dry, clean cloth.