Performance; Sampling Rates; Power-Up; Reset - Universal Flow Monitors PI Series Installation And Operation Manual

PERFORMANCE

SAMPLING RATES

Typical sampling rates are shown in the following table.
PV digital value calculation
SV digital value calculation
Analog output update

POWER-UP

The device is typically ready within 1 second of power-up.
Totalizer is initialized to zero.

RESET

Command 42 ("Device Reset") causes the device to reset its microcontroller. The resulting restart is identical to the normal
power up sequence. (See Section 0.)

SELF-TEST

Self-Test is not supported.

COMMAND RESPONSE TIMES

Minimum 20ms
Typical 50ms
Maximum 100ms
EX-MANUAL-032321
10 per second
10 per second
10 per second
24