Delete All Old Messages; Remote Access - AT&T EL52113 Quick Start Manual

Delete all old messages

You can delete all old messages in idle mode. Once deleted, you cannot retrieve them.
You cannot delete messages until you have listened to them.
• On the telephone base: Press x/DELETE twice.
• On a handset:
Press mEnu/
1.
2. Press or
CID
3. Press or
CID

remote access

You can access the answering system remotely by dialing your home telephone number from
any touch-tone telephone. When the answering system answers, enter the 2-digit remote
access code (19, unless you have changed it; refer to feature summary on page 8). New
messages are played automatically. Use the remote commands to control playback. There is
also a wallet card listing the remote commands at the back of the online user's manual.
remote access commands
actions
Play all messages.........................................................1
Play new messages ...................................................2
Delete the message (during playback) .......3
Delete all old messages ...................................... 33
Repeat or go back......................................................4
Stop .....................................................................................5
in idle mode.
sELECT
to scroll to answering sys, then press
DIr
to scroll to Delete all old, then press
DIr
remote command actions
Help menu .................................................................. 5
Skip the message ..................................................... 6
Record announcement...................................... 7
Turn system on or off ............................................ 0
End remote access call (or hang up) ........... 8
20
/sELECT
mEnu .
/sELECT twice.
mEnu
remote command