Table of Contents
Advertisement
Call screening
If Call screening is on, the incoming messages can be played through the speaker on
the telephone base or the handsets. You can press
stop recording and speak to the caller.
Call screening at the handset:
If the answering system is turned on and there is an incoming call answered by the
answering system, the handset screen shows To screen call and press [SELECT],
alternately. Press
Call screening at the base:
You can turn call screening on or off using the handset. When call screening is off,
you can temporarily turn on the call screening by pressing
on the telephone base. The call screening will return to off for the next incoming call.
Message playback
If there are only new messages or there are both new and old messages, the system
plays only the new messages (in chronological order). If there are no new messages, the
system plays all old messages (in chronological order). When playback begins, the total
number of messages is announced.
You can play messages from either the telephone base or a handset.
On the telephone base, press
corresponding key on the telephone base to repeat, skip, delete, or adjust the volume
of messages.
On a handset, press
corresponding key, as indicated on the screen, to repeat, skip or delete a message.
Delete all old messages
You can delete all old messages in idle mode. Once deleted, you cannot retrieve them.
You cannot delete messages until you have listened to them.
•
On the telephone base: Press
•
On a handset:
1. Press
2. Press
3. Press
on the handset to screen the call.
in idle mode.
or
to scroll to Answering sys, then press
or
to scroll to Delete all old, then press
to listen to messages. Use the the
twice to select Play messages. Use the
twice.
24
on the handset to
or
.
.
Advertisement
Table of Contents
