Haverland ASPEN-S HT10PXD User Manual page 45

To hang the heater on the wall:
1. Choose a suitable installation location for the
heater. (Fig 1)
2. Disassemble the wall bracket by loosening the
screw (do not remove, only loosen) and slide the
metal plate out of the hole. Take out the bracket by
pulling down. (Fig 2)
3. Verify that the bracket is horizontal with a spirit
level and mark the location of 4 holes on the wall.
Drill 4 holes in the wall using a drill adapted to
the diameter of wall plug. Insert the wall plug into
the holes,then screw securely wall mount bracket
onto the wall. (Fig 3)
4. Place the heater against bracket (Fig 4):
A : Align the heater on the 2 lower hooks that are
downwards.
5