Configuring Output Standard - HIKVISION DS-2AE7225TI-A User Manual

(2) You can see ADJUST BLANK POS message on the screen. Click the direction buttons to adjust
the position of the privacy blank to the designed scene.
(3) Click FOCUS+ button, and you can see ADJUST BLANK SIZE message on the screen. Click the
up/down buttons to increase/decrease the height of the mask and click right/left buttons to
increase/decrease the width of the mask. Click IRIS+ button to save the settings and return
to the previous menu and you can see the mask turn to gray.
(4) To modify the configured mask, click IRIS+ button to enter the SET BLANK menu and click
IRIS+ button again to edit.
focus limit
The tilt range for configuring the privacy blanks is from -15° to 60°.
4. Enable or disable the privacy blank function.
Move the cursor to BLANK STATUS. Click IRIS+ button to enter the editing mode and click the up
and down direction buttons to set it ON or OFF.
If no privacy blank has been configured, you cannot set the status as ON.
5. Delete the privacy blank.
You can enter the CLEAR BLANK menu to delete the all the configured privacy blanks.

3.3.3 Configuring Output Standard

Purpose:
The video output standard, including resolution and frame rate, can be changed according to the
actual requirement.
Steps:
1. Move the cursor to enter the Video Settings submenu:
MAIN MENUS > DOME SETTINGS > VIDEO SET
2. Move the cursor to VIDEO STD and click IRIS+ to enter the editing mode.
3. Click the up and down direction buttons to select a desired video standard.
4. Click IRIS+ again to confirm and exit the editing mode.
HD-TVI Speed Dome User Manual
Figure 3-9 Set the Privacy Mask
20