Technical Data - DeWalt DCK665P3T Original Instructions Manual

BRUSHLESS CORDLESS COMPACT 13 mm
DRILL/DRIVER, DCD791
BRUSHLESS CORDLESS COMPACT 13 mm
DRILL/DRIVER/HAMMERDRILL, DCD796
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
No-load speed
1st gear
2nd gear
Impact rate
1st gear
2nd gear
Max. torque (hard/soft)
Chuck capacity
Maximum drilling capacity
Wood
Metal
Masonry
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841-2-1:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level) dB(A)
Drilling into metal
Vibration emission value a
h,D
Uncertainty K =
Drilling into concrete
Vibration emission value a
h,ID
Uncertainty K =
Screwdriving
Vibration emission value a
h,D
Uncertainty K =
WALT one of the
e
DCD791
V 18
DC
2/11
Li-Ion
min -1 0–550
min -1 0–2000
min -1 —
-1
min —
Nm 70/27
mm 1.5–13.0
mm 40
mm 13
mm —
kg 1.1
dB(A) 74
dB(A) 85
5
= m/s 2 <2.5
m/s 2 1.5
= m/s 2 —
m/s 2 —
= m/s 2 <2.5
m/s 2 1.5
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
DCD796
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
18
the exposure level over the total working period.
2/11
An estimation of the level of exposure to vibration and/or
Li-Ion
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
0–550
over the total working period.
0–2000
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
0–9,350
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
0–34,000
EC‑Declaration of Conformity
70/27
1.5–13.0
Machinery Directive
40
13
Drill/Driver/Impact Drill
13
DCD791, DCD796
1.2
D WALT declares that these products described under Technical
e
Data are in compliance with:
2006/42/EC, EN62841-1:2015+AC:2015, EN62841-2-
1:2018+A11:2019.
88
These products also comply with Directive 2014/30/EU and
99
2011/65/EU. For more information, please contact D
3
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
<2.5
1.5
10
Markus Rompel
1.5
Vice-President Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
<2.5
65510, Idstein, Germany
1.5
29.11.2021
English
WALT at
e
WALT.
e
3