English BRUSHLESS CORDLESS COMPACT 13 mm DRILL/DRIVER, DCD791 BRUSHLESS CORDLESS COMPACT 13 mm DRILL/DRIVER/HAMMERDRILL, DCD796 Congratulations! WARNING: The declared vibration emission level represents the main applications of the tool. However if You have chosen a D WALT tool. Years of experience, thorough...
English d ) Remove any adjusting key or wrench before turning c ) When battery pack is not in use, keep it away from the power tool on. A wrench or a key left attached other metal objects like paper clips, coins, keys, to a rotating part of the power tool may result in nails, screws or other small metal objects that can personal injury.
English Electrical Safety material. Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminum foil or any The electric motor has been designed for one voltage only. buildup of metallic particles should be kept away from Always check that the battery pack voltage corresponds to the charger cavities.
English light will blink repeatedly indicating that the charging Wall Mounting process has started. These chargers are designed to be wall mountable or to sit 3. The completion of charge will be indicated by the red upright on a table or work surface. If wall mounting, locate the light remaining ON continuously.
English Contents of opened battery cells may cause respiratory The information provided in this section of the manual is • irritation. Provide fresh air. If symptoms persists, seek provided in good faith and believed to be accurate at the time medical attention.
Wh rating indicates 3 x 36 Wh (3 batteries of 36 Wh). Belt hook Battery Type Mounting screw The DCD791 and DCD796 operate on a 18 volt battery pack. Bit clip These battery packs may be used: DCB181, DCB182, DCB183, Battery pack DCB183B, DCB184, DCB184B, DCB185, DCB187, DCB546, DCB547.
Page 12
English ASSEMBLY AND ADJUSTMENTS The centre position of the control button locks the tool in the off position. When changing the position of the control button, be WARNING: To reduce the risk of serious personal sure the trigger is released. injury, turn tool off and disconnect battery pack nOTE: The first time the tool is run after changing the direction before making any adjustments or removing/ of rotation, you may hear a click on start up.
English CAUTION: When using the tool as a spotlight, be sure iMPORTAnT: When attaching or replacing the belt hook or bit it is secured on a stable surface where it will not cause a clip, use only the screw 8 that is provided.
English remove drill bit from work, and determine cause of stalling. before making any adjustments or removing/ DO nOT CliCK TRiggER On AnD OFF in An ATTEMPT installing attachments or accessories. An accidental TO sTART A sTAllED DRill — This CAn DAMAgE start-up can cause injury.
Page 16
Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België en Luxemburg Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)