Table of Contents
Advertisement
Control Settings
Control Settings
Control Interface
LAN
RS-232C
Network Settings
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
DNS PRIMARY
DNS SECONDARY
MAC ADDRESS
SAVE
Monitor ID
Reset Network Settings
NOTEE:
Only one method, LAN or RS-232, can be used at a time.
Sets network (LAN) control.
Sets RS-232C control.
Configures the network settings of the monitor.
OnE: Obtains the network settings from the DHCP server on the network.
OffE: Sets fixed networks settings.
Manual DNSE: Obtain the network settings from the DHCP server on the network but the DNS
is set manually.
Set the IP address of the monitor when [DHCP] is set to [Off].
Set the subnet mask data for the monitor connected to the network when [Off] is selected for
[DHCP].
Set the default gateway for the monitor connected to the network when [Off] is selected for
[DHCP].
Enter the IP address of the primary DNS server of the network connected to the monitor.
NOTEE:
Enter [0.0.0.0] to delete the setting.
Enter the IP address of the secondary DNS server of the network connected to the monitor.
NOTEE:
Enter [0.0.0.0] to delete the setting.
Shows the monitor's MAC ADDRESS.
This cannot be changed.
Saves the settings.
Sets an ID number for control.
The monitor ID number can be set between 1 and 100.
Returns the network settings to their default values.
English - 75
Advertisement
Table of Contents
