Eeprom Layout - Panasonic KX-TCD430GC Service Manual

Address Default
0F4B 03
0F4C D7
0F4E FF
28. EEPROM LAYOUT (HANDSET)
28.1. Scope
The purpose of this section is to describe "layout of the EEPROM (IC2) KX-A143 Handset".
The EEPROM contains hardware, software, and user specific parameters. Some parameters are
set during production of the handset e.g. crystal oscillator adjustment at 0000..01, some are set
by the user when configuring the handset e.g. ringer volume at 0F38, and some during normal
use of the phone e.g. redial memory at 0311..0392.
Name
Config1
Config2
Config2
Type
Country
Setting
03 D
215
D
255 D
68
Description
BsUiTask configuration (MSB)
Bits 1=enable 0=disable
0: AmPmClockSettingEnabled,
1: ClipDetectionSettingEnabled,
2: AkzMenuEnabled, disabled
3: HakzMenuEnabled, disabled
4: RussianClipSttingEnabled, disabled
5: SmscSendNumberSettingEnabled,
disabled
6: SMSPabxSupportSettingEnabled,
disabled
7: Unused
BsUiTask configuration (LSB)
Bits 1=enable 0=disable
0: FlashTime1Enabled, enabled
1: FlashTime2Enabled, enabled
2: FlashTime3Enabled, enabled
3: KeyClicksEnable, disabled
4: ARSCarrierMenuEnabled, enabled
5: ARSIntDeletionMenuEnabled,
6: ARSMultipleCarrierMenuEnabled,
enabled
7: ARSMultipleAreaCodeMenuEnabled,
enabled
BsUiTask configuration 2
Bits 1=enable 0=disable
0: RingerModeMenuEnabled, enabled
1: CallRestrictionMenuEnabled,
2: CancelHandsetMenuEnabled,
3: BaseToneMenusEnabled, enabled
4-7: Unused