Panasonic KX-TCD430GC Service Manual page 53

- Detector
- Compress/Expander
- First/Second Mixer
- Amplifier for transmission and reception
- EEPROM: IC1
- Temporary operating parameters (for RF, etc.)
- Additionally,
- Power Supply Circuit (+4.0V, +2.65V output)
- Crystal Circuit (10.368MHz)
- Charge Circuit
- Telephone Line Interface Circuit
20.2. Power Supply Circuit
The power is supplied to the DECT BBIC, RF Module, EEPROM, Relay Coil, LED and Charge
Contact from AC Adaptor (+6V) as shown in Fig.101. The power supply is as follows;
- DECT BBIC (IC2): J2(+6V)
- RF Module (IC3): J2(+6V)
- EEPROM (IC1): J2(+6V)
- RINGER: J2(+6V)
- Charge Contact (TP84): J2(+6V)
D4 Q9
D4 Q9
D4 Q9
D4 Q9 R68
<Fig.101>
53
D5 Q8
IC3
D5 Q8
RINGER
D4 R43, R44
IC2
IC2 IC1
TP84