Panasonic KX-TCD430GC Service Manual page 4

1.2. How to recognize that Pb Free solder is used
1.2.1. Base Unit PCB
Note:
The location of the "PbF" mark is subject to change without notice.
1.2.2. Handset PCB
Note:
The location of the "PbF" mark is subject to change without notice.
1.2.3. Charger Unit PCB
Note:
The location of the "PbF" mark is subject to change without notice.
2. FOR SERVICE TECHNICIANS
ICs and LSIs are vulnerable to static electricity.
When repairing, the following precautions will help prevent recurring malfunctions.
1. Cover the plastic parts boxes with aluminum foil.
2. Ground the soldering irons.
3. Use a conductive mat on the worktable.
4. Do not touch IC or LSI pins with bare fingers.
(Component View)
(Flow Solder Side View)
(Component View)
(Flow Solder Side View)
4